1
0
Commit graph

1301 Commits

Autor SHA1 Nachricht Datum
John Keeping
c53a15c77a commit: move layout into page function
This allows us to return a proper HTTP status code when an object is not
found by switching from cgit_print_error() to cgit_print_error_page().

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
51d9176e4b about: move layout into page functions
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
764987980e ui-shared: add cgit_print_layout_{start,end}()
These will avoid needing to call three functions to start page layout in
subsequent patches when we move the layout setup into each individual
page.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
fb2c71fad2 html: remove html_status()
This is now unused.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
fd00e71ab7 snapshot: don't reimplement cgit_print_error_page()
cgit_print_error_page() has the advantage that it sets a suitable HTTP
status code for the response.  Note that setting "mimetype" is redundant
here since it cannot have changed since being initialized in
cgit.c::prepare_context(), so we do not need to worry that
cgit_print_error_page() does not set it.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
58e827cbd9 snapshot: use cgit_print_error_page() for HTTP status codes
This is a bugfix as well as an improvement to the HTTP status code
handling since previously we would not print HTTP headers on any of
these code paths.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
e3e41e5125 patch: use cgit_print_error_page() for HTTP status codes
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
9a06211daa blob: use cgit_print_error_page() to add HTTP headers
This is a bugfix as well as an improvement to the HTTP status code
handling since previously we would not print HTTP headers on any of
these code paths.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
048f195eaf snapshot: use cgit_print_error_page() instead of html_status()
This provides a formatted error response rather than a simple HTTP
error.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
2b3e76a9f9 plain: use cgit_print_error_page() instead of html_status()
This provides a formatted error response rather than a simple HTTP
error.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
329381dfe4 clone: use cgit_print_error_page() instead of html_status()
This provides a formatted error response rather than a simple HTTP
error.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
e9b71ae6fe cgit: use cgit_print_error_page() where appropriate
These are more-or-less one-to-one translations but in the final hunk we
gain an HTTP error code where we used to send "200 OK", which is an
improvement.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
John Keeping
aec1204a54 ui-shared: add cgit_print_error_page() function
This will allow us to generate error responses with the correct HTTP
response code without needing all of the layout boilerplate.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-14 15:46:51 +02:00
Christian Hesse
aa12084f98 ui-patch: make sure to send http headers
Requesting a text/plain patch with bad commit id made cgit send text
without proper http headers. This results in "500 Internal Server Error"
with "Premature end of script headers" in server logs.
So print http headers before error message and return.

Signed-off-by: Christian Hesse <mail@eworm.de>
Reviewed-by: John Keeping <john@keeping.me.uk>
2015-08-14 12:35:25 +02:00
John Keeping
c543d7dbf6 Makefile: make "git/config.mak.uname" inclusion optional
If we haven't got a "git" directory, it should still be possible to run
"make get-git", so we cannot include this file unconditionally.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 17:05:12 +02:00
John Keeping
a360666df3 ui-shared: show full date in tooltip if longer ago than max_relative
Commit caed6cb (ui-shared: show absolute time in tooltip for relative
dates, 2014-12-20) added a toolip when we show a relative time.

However, in some cases we show a short date (that is, the date but not
the time) if an event was sufficiently far in the past and that commit
did not update that case to add the same tooltip.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:40:27 +02:00
John Keeping
b44dd95f13 ui-shared: use common function in print_rel_date()
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:40:12 +02:00
John Keeping
f03e3cb8a5 ui-shared: extract date formatting to a function
This will allow this code to be common with print_rel_date.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:39:59 +02:00
John Keeping
0c4d76755b filter: don't use dlsym unnecessarily
We only need to hook write() if Lua filter's are in use.  If support has
been disabled, remove the dependency on dlsym().

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:39:06 +02:00
John Keeping
7105a78b17 ui-tree: use "sane" isgraph()
Git's git-compat-util.h defines a "sane ctype" that does not use locale
information and works with signed chars, but it does not include
isgraph() so we have included ctype.h ourselves.

However, this means we have to include a system header before
git-compat-util.h which may lead to the system defining some macros
(e.g. _FILE_OFFSET_BITS on Solaris) before git-compat-util.h redefines
them with a different value.  We cannot include ctype.h after
git-compat-util.h because we have defined many of its functions as
macros which causes a stream of compilation errors.

Defining our own "sane" isgraph() using Git's sane isprint() and
isspace() avoids all of these problems.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:38:35 +02:00
John Keeping
e09574bdf6 cgit.h: move stdbool.h from ui-shared.h
Follow the Git policy of including system headers in only one place.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:38:03 +02:00
John Keeping
43620cf6aa cache.c: fix header order
git-compat-util.h may define values that affect how system headers are
interpreted, so move sys/sendfile.h after cgit.h (which includes
git-compat-util.h).

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:37:42 +02:00
John Keeping
f2e8ca806d configfile.c: don't include system headers directly
git-compat-util.h may define various values that affect the
interpretation of system headers.  In most places we include cgit.h
first, which pulls in git-compat-util.h, but this file does not depend
on anything else in CGit, so use git-compat-util.h directly.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:37:28 +02:00
John Keeping
157f544ac2 Remove redundant includes
These are all included in git-compat-util.h (when necessary), which we
include in cgit.h.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:36:53 +02:00
John Keeping
0393102249 Makefile: include Git's config.mak.uname
This pulls in the correct value of $(INSTALL) on a wide variety of
systems.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:36:37 +02:00
John Keeping
2ef4edee19 tests: allow shell to be overridden
On some systems (e.g. Solaris), /bin/sh is not a POSIX shell.  Git
already provides suitable overrides in its config.mak.uname file and we
provide cgit.conf to allow the user to further change this.

The code for this is taken from Git's t/Makefile, meaning that we now
invoke the tests in the same way that Git does.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-13 15:36:18 +02:00
Jason A. Donenfeld
c0b5982303 redirect: cleanliness 2015-08-13 11:39:23 +02:00
Jason A. Donenfeld
622e64d5f2 redirect: be more careful for different cgi setups 2015-08-13 11:39:20 +02:00
John Keeping
da1d4c7776 ui-log: fix double counting
This crept in while rebasing the previous commit onto an updated
upstream.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-12 17:43:08 +02:00
John Keeping
30304d8156 log: allow users to follow a file
Teach the "log" UI to behave in the same way as "git log --follow", when
given a suitable instruction by the user.  The default behaviour remains
to show the log without following renames, but the follow behaviour can
be activated by following a link in the page header.

Follow is not the default because outputting merges in follow mode is
tricky ("git log --follow" will not show merges).  We also disable the
graph in follow mode because the commit graph is not simplified so we
end up with frequent gaps in the graph and many lines that do not
connect with any commits we're actually showing.

We also teach the "diff" and "commit" UIs to respect the follow flag on
URLs, causing the single-file version of these UIs to detect renames.
This feature is needed only for commits that rename the path we're
interested in.

For commits before the file has been renamed (i.e. that appear later in
the log list) we change the file path in the links from the log to point
to the old name; this means that links to commits always limit by the
path known to that commit.  If we didn't do this we would need to walk
down the log diff'ing every commit whenever we want to show a commit.
The drawback is that the "Log" link in the top bar of such a page links
to the log limited by the old name, so it will only show pre-rename
commits.  I consider this a reasonable trade-off since the "Back" button
still works and the log matches the path displayed in the top bar.

Since following renames requires running diff on every commit we
consider, I've added a knob to the configuration file to globally
enable/disable this feature.  Note that we may consider a large number
of commits the revision walking machinery no longer performs any path
limitation so we have to examine every commit until we find a page full
of commits that affect the target path or something related to it.

Suggested-by: René Neumann <necoro@necoro.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-12 16:57:46 +02:00
John Keeping
044e2d26da shared: make cgit_diff_tree_cb public
This will allow us to use this nice wrapper function elsewhere, avoiding
dealing with the diff queue when we only need to inspect a filepair.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-12 16:57:30 +02:00
Jason A. Donenfeld
2d386e227e t0110: Chain together using && 2015-08-12 15:16:05 +02:00
Jason A. Donenfeld
d7034806a4 about: always ensure page has a trailing slash
Otherwise we can't easily embed links to other /about/ pages.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2015-08-12 15:03:32 +02:00
Lazaros Koromilas
13c2d3df04 filters: apply HTML escaping
http://www.w3.org/International/questions/qa-escapes#use
2015-08-12 14:13:44 +02:00
Christian Hesse
de83de276b git: update to v2.5.0
Update to git version v2.5.0.

* Upstream commit 5455ee0573a22bb793a7083d593ae1ace909cd4c (Merge branch
  'bc/object-id') changed API:

  for_each_ref() callback functions were taught to name the objects
  not with "unsigned char sha1[20]" but with "struct object_id".

* Upstream commit dcf692625ac569fefbe52269061230f4fde10e47 (path.c: make
  get_pathname() call sites return const char *)

Signed-off-by: Christian Hesse <mail@eworm.de>
2015-08-12 14:09:05 +02:00
Daniel Reichelt
dc41a00180 Fix processing of repo.hide and repo.ignore
If the global option enable-filter-overrides is set to 1 the repo-specific
options repo.hide and repo.ignore never got processed.

Signed-off-by: Daniel Reichelt <hacking@nachtgeist.net>
Reviewed-by: John Keeping <john@keeping.me.uk>
2015-08-12 14:08:15 +02:00
John Keeping
121e653914 contrib/hooks: add sample post-receive hook using agefile
One of the most frequent questions on the mailing list relates to the
idle time in the repository list.  The answer to this is to use the
"agefile" feature to calculate the time of the last change whenever the
repository receives changes.

Add a sample post-receive hook in a new "contrib" directory so that we
can just point people at the repository in the future.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-12 14:06:36 +02:00
Christian Hesse
2eb41c4665 git: update to v2.4.1
Update to git version v2.4.1, no changes required.

Signed-off-by: Christian Hesse <mail@eworm.de>
2015-05-14 13:49:12 +02:00
Christian Hesse
d1ddce90f5 ui-shared: allow remote refs in branch switcher
Signed-off-by: Christian Hesse <mail@eworm.de>
2015-03-18 18:23:46 +01:00
Christian Hesse
84627609f5 git: update to v2.3.3
Update to git version v2.3.3, no changes required.

Signed-off-by: Christian Hesse <mail@eworm.de>
2015-03-14 17:56:15 +01:00
Jason A. Donenfeld
cadbb69990 Bump version 2015-03-13 16:22:11 +01:00
Lukas Fleischer
db021a1989 Remove no-op link from submodule entries
Instead of linking to the current page ("href='#'"), do not add a link
to a submodule entry at all if the module-link setting is not used.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2015-03-13 14:52:52 +01:00
Jason A. Donenfeld
7511f4b4df filters: Add sample gentoo script 2015-03-13 14:51:22 +01:00
Jason A. Donenfeld
f3ab1f178f cgit: remember to set up env vars before empty clone path 2015-03-09 17:42:12 +01:00
Jason A. Donenfeld
8eef4589d0 ui-shared: currenturl should take into account leading slash 2015-03-09 17:42:02 +01:00
John Keeping
438bac6f57 html: avoid using a plain integer as a NULL pointer
Sparse complains about this table because we use the integer zero as the
NULL pointer.  Use this as an opportunity to reformat the table so that
it always contains 8 elements per row, making it easier to see which
values are being set and which are not.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-03-09 17:41:14 +01:00
John Keeping
80d52079f7 cache: don't use an integer as a NULL pointer
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-03-09 17:40:44 +01:00
John Keeping
d34b967190 ui-shared: don't use an integer as a NULL pointer
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-03-09 17:40:36 +01:00
John Keeping
94e5f212f5 ui-shared: avoid initializing static variable to zero
Sparse complains that we are using a plain integer as a NULL pointer
here, but in fact we do not have to specify a value for this variable at
all since it has static storage duration and thus will be initialized to
NULL by the compiler.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-03-09 17:40:24 +01:00
John Keeping
bd9fb0324d ui-stats: make cgit_period definitions 'static const'
These definitions should not be modified (and never are) so we can move
them to .rodata.

Signed-off-by: John Keeping <john@keeping.me.uk>
2015-03-09 17:40:02 +01:00