Merge branch 'master' of github.com:NIN101/N900_RescueOS

2015-04-05 12:37:46 +02:00 · 2015-04-05 12:37:46 +02:00 · 421ec7ca47
--- a/12
+++ b/12
@ -1,3 +1,15 @@
+=======================
+1.1-gnoutchd 2015-04-??
+
+NEW	code_reset (can reset the security lock code)
+NEW	cfdisk, pg, setterm, ul
+	(these utilities were left out of previous builds in part because
+	 ncurses was disabled at the time that the util-linux package was built)
+NEW	nano syntax highlighting files updated
+NEW	kernel rebuilt
+REMOVED	depmod, iconv, locale support
+DEVELOP	Kernel and roofs builds now fully automated with buildroot
+
 1.1 2013-06-30
 ==============
 FIX	Correclty detach ubifs (thx, Pali)
--- a/60
+++ b/60
@ -0,0 +1,60 @@
+====================
+RescueOS build HOWTO
+
+  These instructions are for folks who want to modify RescueOS and make their
+  own images.  If you just want to use RescueOS on your N900, you'll want to
+  get one of the prebuilt images and look at 'documentation.txt' for usage
+  info.
+
+RescueOS images are modified buildroot images.  This source distribution is
+just a collection of config files, patches, etc. that configure and customize
+buildroot builds.
+
+You'll need a GNU/Linux system to host the build.  You'll need 'git' and
+'quilt' to checkout the RescueOS source and apply our buildroot patches,
+respectively.  Once that's done, you'll also need to satisfy buildroot's
+prerequisites; we'll address that later.
+
+These files are meant to be used with version 2013.02 of buildroot.  (Ports to
+newer versions are welcome.)
+
+Start by unpacking the RescueOS and buildroot sources into separate
+directories.  We recommend putting the two directories next to each other under
+a common parent directory:
+
+  $ mkdir rescueos-build
+  $ cd rescueos-build
+
+Use git to checkout the RescueOS source.  It will go into a subdirectory named
+'N900_RescueOS'.
+
+  $ git clone <rescueos repository url>
+
+Fetch, verify, and unpack the buildroot source.    It will end up in a
+subdirectory named 'buildroot-2013.02'.
+
+  $ wget http://www.buildroot.org/downloads/buildroot-2013.02.tar.bz2
+  $ wget http://www.buildroot.org/downloads/buildroot-2013.02.tar.bz2.sign
+  $ gpg --recv-keys B025BA8B59C36319
+  $ gpg --verify buildroot-2013.02.tar.bz2.sign
+  $ tar --extract --bzip --file buildroot-2013.02.tar.bz2
+
+Buildroot's prerequisites are documented in the "System requirements" section
+of the buildroot manual ('buildroot-2013.02/docs/manual/manual.html').  Install them if necessary.
+
+Now apply our buildroot patches with quilt.
+
+  $ cd buildroot-2013.02
+  $ QUILT_PATCHES=../N900_RescueOS/buildroot-patches quilt push -a
+
+Point buildroot to the RescueOS configuration:
+
+  $ make defconfig BR2_DEFCONFIG=../N900_RescueOS/buildrootconfig
+
+Invoke buildroot to build RescueOS:
+
+  $ make
+
+Buildroot will download and build a whole bunch of packages, starting with the
+cross-compiling toolchain.  When it's done, kernel and cramfs images will be
+left in 'buildroot-2013.02/output/images'.
--- a/buildroot-patches/gcc46-avoid-segfault.patch
+++ b/buildroot-patches/gcc46-avoid-segfault.patch
@ -0,0 +1,42 @@
+Avoid GCC 4.6 segfaults
+
+Buildroot's attempt to build a GCC 4.6.x cross-compilation toolchain might fail
+with something like
+
+/some/path/buildroot-2013.02/output/toolchain/gcc-4.6.3/libgcc/../gcc/libgcc2.c: In function ‘__negdi2’:
+/some/path/buildroot-2013.02/output/toolchain/gcc-4.6.3/libgcc/../gcc/libgcc2.c:72:1: internal compiler error: Segmentation fault
+
+This patch is revision 191605 for GCC 4.7.x
+(<https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=191605>).  Applying it
+to 4.6.x seems to prevent this crash.
+
+Save this file as
+  buildroot-2013.02/toolchain/gcc/4.6.3/999-ira-int.patch
+to have buildroot apply this patch to GCC 4.6.x source before trying to build
+it.
+
+See also <https://gcc.gnu.org/ml/gcc-help/2014-03/msg00049.html>
+
+Index: buildroot-2013.02/toolchain/gcc/4.6.3/999-ira-int.patch
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildroot-2013.02/toolchain/gcc/4.6.3/999-ira-int.patch	2015-03-29 00:09:28.000000000 -0400
+@@ -0,0 +1,18 @@
+--- gcc-4_7-branch/gcc/ira-int.h	2012/09/21 09:19:39	191604
++++ gcc-4_7-branch/gcc/ira-int.h	2012/09/21 10:08:35	191605
+@@ -1138,8 +1138,13 @@
+ ira_allocno_object_iter_cond (ira_allocno_object_iterator *i, ira_allocno_t a,
+ 			      ira_object_t *o)
+ {
+-  *o = ALLOCNO_OBJECT (a, i->n);
+-  return i->n++ < ALLOCNO_NUM_OBJECTS (a);
++  int n = i->n++;
++  if (n < ALLOCNO_NUM_OBJECTS (a))
++    {
++      *o = ALLOCNO_OBJECT (a, n);
++      return true;
++    }
++  return false;
+ }
+ 
+ /* Loop over all objects associated with allocno A.  In each
--- a/buildroot-patches/linux-firmware-version-bump.patch
+++ b/buildroot-patches/linux-firmware-version-bump.patch
@ -0,0 +1,13 @@
+Index: buildroot-2013.02/package/linux-firmware/linux-firmware.mk
+===================================================================
+--- buildroot-2013.02.orig/package/linux-firmware/linux-firmware.mk	2015-03-29 19:37:39.000000000 -0400
+++ buildroot-2013.02/package/linux-firmware/linux-firmware.mk	2015-03-29 19:40:20.000000000 -0400
+@@ -4,7 +4,7 @@
+ #
+ #############################################################
+ 
+-LINUX_FIRMWARE_VERSION = 65a5163b8bb77bd7759efa3ca780867fcaed89b0
+LINUX_FIRMWARE_VERSION = 76b366df2afdde9811fdd5fc128d1779e26e7be7
+ LINUX_FIRMWARE_SITE = http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+ LINUX_FIRMWARE_SITE_METHOD = git
+ 
--- a/buildroot-patches/linux-firmware-wl1251.patch
+++ b/buildroot-patches/linux-firmware-wl1251.patch
@ -0,0 +1,33 @@
+Index: buildroot-2013.02/package/linux-firmware/Config.in
+===================================================================
+--- buildroot-2013.02.orig/package/linux-firmware/Config.in	2013-02-28 16:48:28.000000000 -0500
+++ buildroot-2013.02/package/linux-firmware/Config.in	2015-03-29 19:48:36.000000000 -0400
+@@ -71,6 +71,11 @@
+ 	help
+ 	  Realtek 8712
+ 
+config BR2_PACKAGE_LINUX_FIRMWARE_TI_WL1251
+	bool "TI wl1251"
+	help
+	  Firmware files for wl1251 WLAN module
+
+ config BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X
+ 	bool "TI wl127X"
+ 	help
+Index: buildroot-2013.02/package/linux-firmware/linux-firmware.mk
+===================================================================
+--- buildroot-2013.02.orig/package/linux-firmware/linux-firmware.mk	2015-03-29 19:40:20.000000000 -0400
+++ buildroot-2013.02/package/linux-firmware/linux-firmware.mk	2015-03-29 19:45:47.000000000 -0400
+@@ -57,6 +57,12 @@
+ LINUX_FIRMWARE_FILES_$(BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_SD8787) += \
+ 	mrvl/sd8787_uapsta.bin LICENCE.Marvell
+ 
+# wl1251
+LINUX_FIRMWARE_FILES_$(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL1251) += \
+	ti-connectivity/wl1251-fw.bin				\
+	ti-connectivity/wl1251-nvs.bin				\
+	LICENCE.ti-connectivity
+
+ # wl127x
+ LINUX_FIRMWARE_FILES_$(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X) += \
+ 	ti-connectivity/wl1271-fw-2.bin				\
--- a/buildroot-patches/nano-add-syntax-highlighting.patch
+++ b/buildroot-patches/nano-add-syntax-highlighting.patch
@ -0,0 +1,19 @@
+Index: buildroot-2013.02/package/nano/nano.mk
+===================================================================
+--- buildroot-2013.02.orig/package/nano/nano.mk	2015-03-31 20:35:07.000000000 -0400
+++ buildroot-2013.02/package/nano/nano.mk	2015-03-31 21:29:58.000000000 -0400
+@@ -18,10 +18,14 @@
+ 
+ define NANO_INSTALL_TARGET_CMDS
+ 	$(INSTALL) -m 0755 $(@D)/src/nano $(TARGET_DIR)/usr/bin/nano
+	mkdir -p $(TARGET_DIR)/usr/share/nano
+	$(INSTALL) -t $(TARGET_DIR)/usr/share/nano -m 0644 \
+	           $(@D)/doc/syntax/*.nanorc
+ endef
+ 
+ define NANO_UNINSTALL_TARGET_CMDS
+ 	rm -f $(TARGET_DIR)/usr/bin/nano
+	rm -rf $(TARGET_DIR)/usr/share/nano
+ endef
+ 
+ $(eval $(autotools-package))
--- a/buildroot-patches/pkg-maemo-code-reset.patch
+++ b/buildroot-patches/pkg-maemo-code-reset.patch
@ -0,0 +1,51 @@
+Index: buildroot-2013.02/package/Config.in
+===================================================================
+--- buildroot-2013.02.orig/package/Config.in	2015-03-31 16:47:43.000000000 -0400
+++ buildroot-2013.02/package/Config.in	2015-03-31 16:48:41.000000000 -0400
+@@ -250,6 +250,7 @@
+ source "package/lshw/Config.in"
+ source "package/lsuio/Config.in"
+ source "package/lvm2/Config.in"
+source "package/maemo-code-reset/Config.in"
+ source "package/mdadm/Config.in"
+ source "package/media-ctl/Config.in"
+ source "package/memtester/Config.in"
+Index: buildroot-2013.02/package/maemo-code-reset/Config.in
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildroot-2013.02/package/maemo-code-reset/Config.in	2015-03-31 16:47:43.000000000 -0400
+@@ -0,0 +1,11 @@
+config BR2_PACKAGE_MAEMO_CODE_RESET
+	bool "maemo-code-reset"
+	select BR2_PACKAGE_MAEMO_LIBCAL
+	help
+	  Reset the lock code of a Nokia N900.
+
+	  Derived from the Mameo code-reset package
+	  (<http://maemo.org/packages/view/code-reset/>)
+
+	  (This is a RescueOS-specific package inserted by patching; see
+	   N900_RescueOS/buildroot-patches/pkg-maemo-code-reset.patch)
+Index: buildroot-2013.02/package/maemo-code-reset/maemo-code-reset.mk
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildroot-2013.02/package/maemo-code-reset/maemo-code-reset.mk	2015-03-31 16:47:43.000000000 -0400
+@@ -0,0 +1,18 @@
+#
+# maemo-code-reset
+#
+
+MAEMO_CODE_RESET_VERSION = 0.1
+MAEMO_CODE_RESET_SOURCE = code-reset_$(MAEMO_CODE_RESET_VERSION).tar.gz
+MAEMO_CODE_RESET_SITE = http://repository.maemo.org/extras-devel/pool/fremantle/free/source/c/code-reset/
+MAEMO_CODE_RESET_DEPENDENCIES = maemo-libcal
+
+define MAEMO_CODE_RESET_BUILD_CMDS
+	$(TARGET_CC) -lcrypt -lcal $(@D)/code_reset.c -o $(@D)/code_reset
+endef
+
+define MAEMO_CODE_RESET_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/code_reset $(TARGET_DIR)/usr/sbin
+endef
+
+$(eval $(generic-package))
--- a/buildroot-patches/pkg-maemo-libcal.patch
+++ b/buildroot-patches/pkg-maemo-libcal.patch
@ -0,0 +1,77 @@
+Index: buildroot-2013.02/package/Config.in
+===================================================================
+--- buildroot-2013.02.orig/package/Config.in	2015-03-31 16:22:39.000000000 -0400
+++ buildroot-2013.02/package/Config.in	2015-03-31 17:12:47.000000000 -0400
+@@ -457,6 +457,7 @@
+ source "package/libusb/Config.in"
+ source "package/libusb-compat/Config.in"
+ source "package/libv4l/Config.in"
+source "package/maemo-libcal/Config.in"
+ source "package/mtdev/Config.in"
+ source "package/neardal/Config.in"
+ source "package/pcsc-lite/Config.in"
+Index: buildroot-2013.02/package/maemo-libcal/Config.in
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildroot-2013.02/package/maemo-libcal/Config.in	2015-03-31 16:22:39.000000000 -0400
+@@ -0,0 +1,13 @@
+config BR2_PACKAGE_MAEMO_LIBCAL
+	bool "maemo-libcal"
+	help
+	  Maemo devices (such as the Nokia N900) have a "calibration" storage
+	  area where various bits of configuration data are kept.  CAL is a
+	  Maemo-specific C API for reading and writing this data.
+
+	  This package installs a free-software reimplementation of this API
+	  from the Community SSU project
+	  (<https://github.com/community-ssu/libcal>)
+
+	  (This is a RescueOS-specific package inserted by patching; see
+	   N900_RescueOS/buildroot-patches/pkg-maemo-libcal.patch)
+Index: buildroot-2013.02/package/maemo-libcal/maemo-libcal.mk
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildroot-2013.02/package/maemo-libcal/maemo-libcal.mk	2015-03-31 16:22:39.000000000 -0400
+@@ -0,0 +1,26 @@
+#
+# maemo-libcal
+#
+
+MAEMO_LIBCAL_VERSION = d4c5fd9293ddb693c9b032b4c084cd0343b3ea26
+MAEMO_LIBCAL_SITE = https://github.com/community-ssu/libcal.git
+MAEMO_LIBCAL_SITE_METHOD = git
+MAEMO_LIBCAL_INSTALL_STAGING = YES
+
+define MAEMO_LIBCAL_BUILD_CMDS
+	$(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) all
+endef
+
+define MAEMO_LIBCAL_INSTALL_STAGING_CMDS
+	$(MAKE) DESTDIR="$(STAGING_DIR)" -C $(@D) install
+endef
+
+define MAEMO_LIBCAL_INSTALL_TARGET_CMDS
+	$(MAKE) DESTDIR="$(TARGET_DIR)" -C $(@D) install
+endef
+
+define MAEMO_LIBCAL_CLEAN_CMDS
+	-$(MAKE) -C $(@D) clean
+endef
+
+$(eval $(generic-package))
+Index: buildroot-2013.02/package/maemo-libcal/maemo-libcal-fix-makefile.patch
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ buildroot-2013.02/package/maemo-libcal/maemo-libcal-fix-makefile.patch	2015-03-31 17:01:15.000000000 -0400
+@@ -0,0 +1,11 @@
+diff -ur libcal.orig/Makefile libcal/Makefile
+--- libcal.orig/Makefile	2015-03-31 16:59:00.000000000 -0400
++++ libcal/Makefile	2015-03-31 16:59:45.000000000 -0400
+@@ -12,5 +12,5 @@
+ 	install -m 644 cal.h "$(DESTDIR)/usr/include/"
+ 	install -m 644 libcal.pc "$(DESTDIR)/usr/lib/pkgconfig/"
+ 	install -m 755 libcal.so.1.0.0 "$(DESTDIR)/usr/lib/"
+-	ln -s libcal.so.1.0.0 "$(DESTDIR)/usr/lib/libcal.so.1"
+-	ln -s libcal.so.1.0.0 "$(DESTDIR)/usr/lib/libcal.so"
++	ln -sf libcal.so.1.0.0 "$(DESTDIR)/usr/lib/libcal.so.1"
++	ln -sf libcal.so.1.0.0 "$(DESTDIR)/usr/lib/libcal.so"
--- a/buildroot-patches/series
+++ b/buildroot-patches/series
@ -0,0 +1,6 @@
+gcc46-avoid-segfault.patch
+linux-firmware-version-bump.patch
+linux-firmware-wl1251.patch
+nano-add-syntax-highlighting.patch
+pkg-maemo-libcal.patch
+pkg-maemo-code-reset.patch
--- a/1080
+++ b/1080
--- a/79
+++ b/79
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Busybox version: 1.19.3
-# Sun Oct 30 22:37:23 2011
+# Busybox version: 1.21.0
+# Mon Mar 30 15:58:20 2015
 #
 CONFIG_HAVE_DOT_CONFIG=y

@ -42,6 +42,7 @@ CONFIG_FEATURE_CLEAN_UP=y
 CONFIG_FEATURE_UTMP=y
 CONFIG_FEATURE_WTMP=y
 CONFIG_FEATURE_PIDFILE=y
+CONFIG_PID_FILE_PATH="/var/run"
 CONFIG_FEATURE_SUID=y
 CONFIG_FEATURE_SUID_CONFIG=y
 CONFIG_FEATURE_SUID_CONFIG_QUIET=y
@ -54,7 +55,7 @@ CONFIG_FEATURE_HAVE_RPC=y
 #
 # Build Options
 #
-CONFIG_STATIC=y
+# CONFIG_STATIC is not set
 # CONFIG_PIE is not set
 # CONFIG_NOMMU is not set
 # CONFIG_BUILD_LIBBUSYBOX is not set
@ -62,7 +63,10 @@ CONFIG_STATIC=y
 # CONFIG_FEATURE_SHARED_BUSYBOX is not set
 CONFIG_LFS=y
 CONFIG_CROSS_COMPILER_PREFIX=""
+CONFIG_SYSROOT=""
 CONFIG_EXTRA_CFLAGS=""
+CONFIG_EXTRA_LDFLAGS=""
+CONFIG_EXTRA_LDLIBS=""

 #
 # Debugging Options
@ -92,7 +96,8 @@ CONFIG_PREFIX="./_install"
 # CONFIG_FEATURE_SYSTEMD is not set
 CONFIG_FEATURE_RTMINMAX=y
 CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_MD5_SMALL=1
+CONFIG_SHA3_SMALL=1
 CONFIG_FEATURE_FAST_TOP=y
 CONFIG_FEATURE_ETC_NETWORKS=y
 CONFIG_FEATURE_USE_TERMIOS=y
@ -101,6 +106,7 @@ CONFIG_FEATURE_EDITING_MAX_LEN=1024
 # CONFIG_FEATURE_EDITING_VI is not set
 CONFIG_FEATURE_EDITING_HISTORY=255
 CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+# CONFIG_FEATURE_EDITING_SAVE_ON_EXIT is not set
 CONFIG_FEATURE_REVERSE_SEARCH=y
 CONFIG_FEATURE_TAB_COMPLETION=y
 # CONFIG_FEATURE_USERNAME_COMPLETION is not set
@ -140,6 +146,7 @@ CONFIG_FEATURE_CPIO_P=y
 CONFIG_GUNZIP=y
 CONFIG_GZIP=y
 CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
+CONFIG_GZIP_FAST=0
 CONFIG_LZOP=y
 # CONFIG_LZOP_COMPR_HIGH is not set
 # CONFIG_RPM2CPIO is not set
@ -173,11 +180,13 @@ CONFIG_DATE=y
 CONFIG_FEATURE_DATE_ISOFMT=y
 # CONFIG_FEATURE_DATE_NANO is not set
 CONFIG_FEATURE_DATE_COMPAT=y
+CONFIG_HOSTID=y
 CONFIG_ID=y
 CONFIG_GROUPS=y
 CONFIG_TEST=y
 CONFIG_FEATURE_TEST_64=y
 CONFIG_TOUCH=y
+CONFIG_FEATURE_TOUCH_SUSV3=y
 CONFIG_TR=y
 CONFIG_FEATURE_TR_CLASSES=y
 CONFIG_FEATURE_TR_EQUIV=y
@ -220,7 +229,6 @@ CONFIG_FOLD=y
 CONFIG_FSYNC=y
 CONFIG_HEAD=y
 CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
 CONFIG_INSTALL=y
 CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
 CONFIG_LN=y
@ -257,6 +265,7 @@ CONFIG_SEQ=y
 CONFIG_SHA1SUM=y
 CONFIG_SHA256SUM=y
 CONFIG_SHA512SUM=y
+CONFIG_SHA3SUM=y
 CONFIG_SLEEP=y
 CONFIG_FEATURE_FANCY_SLEEP=y
 CONFIG_FEATURE_FLOAT_SLEEP=y
@ -304,7 +313,7 @@ CONFIG_FEATURE_AUTOWIDTH=y
 CONFIG_FEATURE_HUMAN_READABLE=y

 #
-# Common options for md5sum, sha1sum, sha256sum, sha512sum
+# Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum
 #
 CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y

@ -369,7 +378,6 @@ CONFIG_FEATURE_VI_SETOPTS=y
 CONFIG_FEATURE_VI_SET=y
 CONFIG_FEATURE_VI_WIN_RESIZE=y
 CONFIG_FEATURE_VI_ASK_TERMINAL=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
 CONFIG_AWK=y
 CONFIG_FEATURE_AWK_LIBM=y
 # CONFIG_CMP is not set
@ -461,6 +469,7 @@ CONFIG_DELUSER=y
 # CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set
 CONFIG_GETTY=y
 CONFIG_LOGIN=y
+# CONFIG_LOGIN_SESSION_AS_CHILD is not set
 # CONFIG_PAM is not set
 CONFIG_LOGIN_SCRIPTS=y
 CONFIG_FEATURE_NOLOGIN=y
@ -469,6 +478,7 @@ CONFIG_PASSWD=y
 CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
 CONFIG_CRYPTPW=y
 # CONFIG_CHPASSWD is not set
+CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="des"
 CONFIG_SU=y
 CONFIG_FEATURE_SU_SYSLOG=y
 CONFIG_FEATURE_SU_CHECKS_SHELLS=y
@ -487,14 +497,14 @@ CONFIG_LSATTR=y
 # Linux Module Utilities
 #
 CONFIG_MODINFO=y
-CONFIG_MODPROBE_SMALL=y
-CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE=y
-CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED=y
-# CONFIG_INSMOD is not set
-# CONFIG_RMMOD is not set
-# CONFIG_LSMOD is not set
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_INSMOD=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
 # CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set
-# CONFIG_MODPROBE is not set
+CONFIG_MODPROBE=y
 # CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
 # CONFIG_DEPMOD is not set

@ -508,9 +518,9 @@ CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED=y
 # CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
 # CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
 # CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
-# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set
-# CONFIG_FEATURE_MODUTILS_ALIAS is not set
-# CONFIG_FEATURE_MODUTILS_SYMBOLS is not set
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_MODUTILS_ALIAS=y
+CONFIG_FEATURE_MODUTILS_SYMBOLS=y
 CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"

@ -518,6 +528,12 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 # Linux System Utilities
 #
 # CONFIG_BLOCKDEV is not set
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
 # CONFIG_REV is not set
 CONFIG_ACPID=y
 CONFIG_FEATURE_ACPID_COMPAT=y
@ -561,12 +577,6 @@ CONFIG_IPCS=y
 CONFIG_LOSETUP=y
 # CONFIG_LSPCI is not set
 # CONFIG_LSUSB is not set
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_RENAME=y
-CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
 CONFIG_MKSWAP=y
 CONFIG_FEATURE_MKSWAP_UUID=y
 CONFIG_MORE=y
@ -608,9 +618,11 @@ CONFIG_FEATURE_VOLUMEID_EXT=y
 CONFIG_FEATURE_VOLUMEID_BTRFS=y
 CONFIG_FEATURE_VOLUMEID_REISERFS=y
 CONFIG_FEATURE_VOLUMEID_FAT=y
+CONFIG_FEATURE_VOLUMEID_EXFAT=y
 CONFIG_FEATURE_VOLUMEID_HFS=y
 CONFIG_FEATURE_VOLUMEID_JFS=y
 CONFIG_FEATURE_VOLUMEID_XFS=y
+CONFIG_FEATURE_VOLUMEID_NILFS=y
 CONFIG_FEATURE_VOLUMEID_NTFS=y
 CONFIG_FEATURE_VOLUMEID_ISO9660=y
 CONFIG_FEATURE_VOLUMEID_UDF=y
@ -618,6 +630,7 @@ CONFIG_FEATURE_VOLUMEID_LUKS=y
 CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
 CONFIG_FEATURE_VOLUMEID_CRAMFS=y
 CONFIG_FEATURE_VOLUMEID_ROMFS=y
+CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_FEATURE_VOLUMEID_SYSV=y
 CONFIG_FEATURE_VOLUMEID_OCFS2=y
 CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
@ -729,7 +742,7 @@ CONFIG_PING=y
 # CONFIG_PING6 is not set
 CONFIG_FEATURE_FANCY_PING=y
 # CONFIG_WHOIS is not set
-# CONFIG_FEATURE_IPV6 is not set
+CONFIG_FEATURE_IPV6=y
 # CONFIG_FEATURE_UNIX_LOCAL is not set
 # CONFIG_FEATURE_PREFER_IPV4_ADDRESS is not set
 # CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
@ -831,6 +844,7 @@ CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
 # CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
 CONFIG_TUNCTL=y
 CONFIG_FEATURE_TUNCTL_UG=y
+# CONFIG_UDHCPC6 is not set
 # CONFIG_UDHCPD is not set
 # CONFIG_DHCPRELAY is not set
 # CONFIG_DUMPLEASES is not set
@ -877,6 +891,7 @@ CONFIG_FEATURE_MIME_CHARSET=""
 # Process Utilities
 #
 # CONFIG_IOSTAT is not set
+CONFIG_LSOF=y
 # CONFIG_MPSTAT is not set
 # CONFIG_NMETER is not set
 # CONFIG_PMAP is not set
@ -884,6 +899,13 @@ CONFIG_FEATURE_MIME_CHARSET=""
 CONFIG_PSTREE=y
 # CONFIG_PWDX is not set
 # CONFIG_SMEMCAP is not set
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_SMP_CPU=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOP_SMP_PROCESS=y
+CONFIG_FEATURE_TOPMEM=y
 CONFIG_UPTIME=y
 CONFIG_FEATURE_UPTIME_UTMP_SUPPORT=y
 CONFIG_FREE=y
@ -898,18 +920,12 @@ CONFIG_FEATURE_PIDOF_OMIT=y
 # CONFIG_PKILL is not set
 CONFIG_PS=y
 CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_LONG=y
 # CONFIG_FEATURE_PS_TIME is not set
 # CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set
 # CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
 # CONFIG_RENICE is not set
 # CONFIG_BB_SYSCTL is not set
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_SMP_CPU=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOP_SMP_PROCESS=y
-CONFIG_FEATURE_TOPMEM=y
 CONFIG_FEATURE_SHOW_THREADS=y
 CONFIG_WATCH=y

@ -1004,6 +1020,7 @@ CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0
 CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0
 # CONFIG_LOGREAD is not set
 # CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+# CONFIG_FEATURE_KMSG_SYSLOG is not set
 # CONFIG_KLOGD is not set
 # CONFIG_FEATURE_KLOGD_KLOGCTL is not set
 # CONFIG_LOGGER is not set
--- a/documentation.txt
+++ b/documentation.txt
@ -6,6 +6,7 @@ notable:

 mounting maemo /
 EMMC access(can mount maemo home and MyDocs partition)
+Lock code reset
 WiFi support
 USB mass-storage mode
 USB networking
@ -44,9 +45,11 @@ anyway, correct?

 -fsck file system checks

+-Resetting the lock code (without reflashing)
+
 -and more...

-Booting the initrd
+Booting RescueOS
 ~~~~~~~~~~~~~~~
 Note: You can not store persistent data in / as everything happens in RAM. Of
 course, it becomes possible when you mount the EMMC or sd card on the
@ -55,10 +58,40 @@ corresponding mountpoint.
 Note: It comes without any promises and without any warranty. Therefore you
 are doing everything at your own risk. 

-flasher-3.5 -k 2.6.37 -n initrd.img -l -b"rootdelay root=/dev/ram0"
+To load RescueOS onto an N900, you'll need a USB data cable, a PC, and one of
+the following flashers:

-wait for "suitable device not found..." and connect the N900 to your 
-Linux box through USB.
+- 0xFFFF - the Open Free Fiasco Firmware Flasher
+  Free/open source, but only runs on GNU/Linux.
+  Packaged for Ubuntu and Debian as '0xffff':
+    http://packages.ubuntu.com/source/0xffff
+    https://packages.debian.org/sid/0xffff
+  Discussion:  http://talk.maemo.org/showthread.php?t=87996
+  Source repo: https://github.com/pali/0xFFFF
+
+- maemo_flasher v3.5 - the original proprietary flasher from Nokia
+  Windows, MacOS, GNU/Linux
+  Official distribution site is gone.  Archive copies at:
+    https://web.archive.org/web/20131117084237/http://skeiron.org/tablets-dev/maemo_dev_env_downloads/
+  Documentation:
+    http://wiki.maemo.org/Documentation/Maemo_5_Developer_Guide/Development_Environment/Maemo_Flasher-3.5
+
+Switch the N900 completely off.  If it is plugged into a charger, a PC, or
+anything else by its USB port, unplug it and wait about 10 seconds to give the
+charger software time to shut down.  Don't connect it to the PC just yet.
+
+Startup the flasher and get it ready to load RescueOS.  For 0xFFFF, the
+incantation is:
+
+  0xFFFF -m kernel:zImage -m initfs:rootfs.cramfs -l -b 'rootdelay root=/dev/ram0'
+
+For maemo_flasher, it's:
+
+  flasher-3.5 -k zImage -n rootfs.cramfs -l -b"rootdelay root=/dev/ram0"
+
+You'll get a message like "suitable device not found...", but the flasher
+should block and wait.  Now connect the N900 to the PC with the data cable; the
+flasher should detect the device, upload RescueOS, launch it, and then exit.


 ~~~~~~~~~~~~~~~
@ -77,6 +110,11 @@ This scripts mounts the maemo root to /mnt/maemo.

 /rescueOS/umount-maemo-root.sh

+Lock code reset
+---------------
+code_reset
+# This will set the lock code back to the default ('12345').
+
 USB Networking
 -------------
 /rescueOS/usbnetworking-enable.sh
--- a/fs-overlay/etc/init.d/rcS
+++ b/fs-overlay/etc/init.d/rcS
@ -0,0 +1,84 @@
+#!/bin/sh
+EMULATOR=0
+VERSION="1.1"
+mount -t sysfs none /sys
+mount -n -t proc none /proc
+echo 200 > /sys/class/backlight/acx565akm/brightness
+mount -t tmpfs -o size=64k,mode=0755 tmpfs /dev
+mkdir /dev/pts
+mount -t devpts devpts /dev/pts
+mount -t tmpfs -o rw,noexec,nosuid,mode=0755 tmpfs /run
+mount -t tmpfs -o rw,mode=0755 tmpfs /root/
+mount -t tmpfs -o rw,nosuid,nodev tmpfs /tmp/
+echo /sbin/mdev.sh > /proc/sys/kernel/hotplug
+mdev -s
+find /sys/devices/* -name modalias | while read module ; do
+modprobe `cat $module` 2> /dev/null
+done
+hwclock -s 
+hostname -F /etc/hostname
+
+
+modprobe leds-lp5523
+
+
+/sbin/battery-watchdog &
+#/rescueOS/charge21.bash > /run/batterylog &
+clear
+echo "Disclaimer: This system comes without any warranty. Use it at your own risk."
+sleep 3
+clear
+echo "Welcome to N900 Rescue Initrd $VERSION" 
+echo
+
+/sbin/loadkmap < /rescueOS/nokia-n900.kmap
+
+for i in 2 3 7 8 ; do
+    echo 25 > /sys/class/leds/lp5523\:channel$i/brightness
+done
+ 
+autostart_script=`grep -q autostart /proc/cmdline && cat /proc/cmdline | sed -e 's/.*autostart=\(.*\)/\1/'`
+if [ -n "$autostart_script" ] ; then
+echo "Running $autostart_script" 
+$autostart_script 
+fi
+
+touch /run/resolv.conf
+
+echo "The root password is: rootme" 
+
+#Being helpful for beginners, and annoying for "power users"
+echo "Start an FTP server with anonymous up and downloads everywhere? y/n"
+read result;
+if [ "$result" = "y" ] ; then
+tcpsvd -v 0.0.0.0 21 ftpd -w & 
+fi
+
+echo "Start telnetd? y/n"
+read result;
+
+if [ "$result" = "y" ] ; then
+telnetd 
+fi
+
+echo "Start usb-networking? y/n"
+read result;
+
+if [ "$result" = "y" ] ; then
+/rescueOS/usbnetworking-enable.sh
+fi
+
+#node mess 
+if [ -e /sys/block/mmcblk0 ] && [ -e /sys/block/mmcblk1 ] ; then 
+		echo -n "1" > /run/internal_nodenr
+else
+		echo -n "0" > /run/internal_nodenr
+fi
+
+
+
+if [ "$EMULATOR" = "1" ] ; then
+udhcpc eth0
+fi
+#We are done.
+
--- a/fs-overlay/etc/inittab
+++ b/fs-overlay/etc/inittab
@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS
+tty1::respawn:-/bin/bash
+ttyS0::respawn:-/bin/bash
+::shutdown:/bin/sh /rescueOS/shutdown-cleanup 
--- a/fs-overlay/etc/passwd
+++ b/fs-overlay/etc/passwd
@ -0,0 +1 @@
+root:$1$sz.20p5a$c40FElyGq0cIfHXeQQChQ/:0:0:root:/root:/bin/bash
--- a/fs-overlay/etc/profile
+++ b/fs-overlay/etc/profile
@ -0,0 +1 @@
+PS1="\w\$ "
--- a/fs-overlay/etc/resolv.conf
+++ b/fs-overlay/etc/resolv.conf
@ -0,0 +1 @@
+/run/resolv.conf
--- a/fs-overlay/mnt/free1/.empty
+++ b/fs-overlay/mnt/free1/.empty
--- a/fs-overlay/mnt/free10/.empty
+++ b/fs-overlay/mnt/free10/.empty
--- a/fs-overlay/mnt/free2/.empty
+++ b/fs-overlay/mnt/free2/.empty
--- a/fs-overlay/mnt/free3/.empty
+++ b/fs-overlay/mnt/free3/.empty
--- a/fs-overlay/mnt/free4/.empty
+++ b/fs-overlay/mnt/free4/.empty
--- a/fs-overlay/mnt/free5/.empty
+++ b/fs-overlay/mnt/free5/.empty
--- a/fs-overlay/mnt/free6/.empty
+++ b/fs-overlay/mnt/free6/.empty
--- a/fs-overlay/mnt/free7/.empty
+++ b/fs-overlay/mnt/free7/.empty
--- a/fs-overlay/mnt/free8/.empty
+++ b/fs-overlay/mnt/free8/.empty
--- a/fs-overlay/mnt/free9/.empty
+++ b/fs-overlay/mnt/free9/.empty
--- a/fs-overlay/mnt/maemo/.empty
+++ b/fs-overlay/mnt/maemo/.empty
--- a/fs-overlay/rescueOS/README
+++ b/fs-overlay/rescueOS/README
@ -0,0 +1 @@
+Apparently most scripts here are not completed, dumb and  based on assumptations. Use them if you know what you are doing...
--- a/fs-overlay/rescueOS/charge21.bash
+++ b/fs-overlay/rescueOS/charge21.bash
@ -0,0 +1,236 @@
+#/bin/bash
+#Original by ShadowJK. http://enivax.net/jk/n900/ 
+if [ -e /run/charger-runned ] ; then
+echo "Script already started. Delete run/charger-runned if you are sure no other instance is running"
+exit
+fi
+touch /run/charger-runned
+echo "Charger: " $(cat /sys/devices/platform/musb_hdrc/charger)
+
+I2CGET=/usr/bin/i2cget
+I2CSET=/usr/bin/i2cset
+
+if pgrep bme_RX-51; then
+	echo "BME is running. Exiting."
+	exit
+fi
+
+configure()
+{
+  echo -n "Pre-Config Status: " $($I2CGET -y 2 0x6b 0x00)
+  echo -n ", " $($I2CSET -y 2 0x6b 0x00) "." 
+
+  # Disable charger for configuration:
+  # $I2CSET -y 2 0x6b 0x01 0xcc # No limit, 3.4V weak threshold, enable term, charger disable
+
+  # Register 0x04
+  # 8: reset
+  # 4: 27.2mV  # charge current
+  # 2: 13.6mV
+  # 1: 6.8mV
+  # 8: N/A
+  # 4: 13.6mV # termination current
+  # 2: 6.8mV
+  # 1: 3.4mV
+  # 7-1250 6-1150 5-1050 4-950 3-850 2-750 1-650 0-550
+  # 7-400 6-350 5-300 4-250 3-200 2-150 1-100 0-50
+  $I2CSET -y -m 0xFF 2 0x6b 0x04 0x42;
+
+  # Register 0x02
+  # 8: .640 V
+  # 4: .320 V
+  # 2: .160 V
+  # 1: .080
+  # 8: .040
+  # 4: .020 (+ 3.5)
+  # 2: otg pin active at high (default 1)
+  # 1: enable otg pin
+  $I2CSET -y -m 0xfc 2 0x6b 0x02 0x8c; 
+  REGV=4200
+  # 4.24 = 3.5 + .640 + .08 + .02 = 94 
+  # 4.22 = 3.5 + ,640 + .08 = 90
+  # 4.2 = 3.5 + .640 + .040 + .02 = 8c
+  # 4.16 = 3.5 + .640V + .020 = 84
+  # 4.1 = 3.5 + .320 + .160 + .08 + .04 = 78
+  # 4.0 = 3.5 + .320 + .160 + .02 = 64
+  # 3.9 = 3.5 + .320 + .080 = 50
+
+  # Register 0x1
+  # 8: 00 = 100, 01 = 500, 10 = 800mA
+  # 4: 11 = no limit
+  # 2: 200mV weak threshold default 1
+  # 1: 100mV weak treshold defsult 1 (3.4 - 3.7)
+  # 8: enable termination
+  # 4: charger disable
+  # 2: high imp mode
+  # 1: boost
+  $I2CSET -y 2 0x6b 0x01 0x08; 
+  #hotswap: c0
+  #normal: c8
+
+
+  # Register 0x00
+  # 8: Read:  OTG Pin Status
+  #    Write: Timer Reset
+  # 4: Enable Stat Pin
+  # 2: Stat : 00 Ready 01 In Progress
+  # 1:      : 10 Done  11 Fault
+  # 8: Boost Mode
+  # 4: Fault: 000 Normal 001 VBUS OVP 010 Sleep Mode 
+  # 2:        011 Poor input or Vbus < UVLO 
+  # 1:        100 Battery OVP 101 Thermal Shutdown
+  #           110 Timer Fault 111 NA
+  $I2CSET -y 2 0x6b 0x00 0x00; 
+
+  # Softstart
+
+  $I2CSET -y 2 0x6b 0x01 0xc8;
+  sleep 1
+  #echo " Unlimited: " $($I2CGET -y 2 0x6b 0x00)
+  #$I2CSET -y 2 0x6b 0x00 0x80 # timer reset
+  cat /sys/devices/platform/musb_hdrc/charger >/dev/null
+}
+
+configure
+
+# Initialize variables
+FULL=0
+MODE="STANDBY"
+WALLCHARGER=0
+
+# Assuming a nice round number 20mOhm for bq27200 sense resistor
+RS=21
+
+# Assuming this much resistance between charger and battery
+CR=131
+
+BQPATH="/sys/class/power_supply/bq27200-0"
+
+get_nac ()
+{
+    NAC=$(cat $BQPATH/charge_now)
+    NAC=$((NAC/1000))
+}
+get_rsoc ()
+{
+    RSOC=$(cat $BQPATH/capacity)
+}
+get_volt ()
+{
+   VOLT=$(cat $BQPATH/voltage_now)
+   VOLT=$((VOLT/1000))
+}
+get_rate ()
+{
+    RATE=$(cat $BQPATH/current_now)
+    RATE=$((RATE/1000))
+    RATE=$((-RATE))
+}
+calculate_system_use ()
+{
+    SYSTEM_USE=$(( ($REGV *1000 - $VOLT*1000) / $CR - $RATE ))
+    if [ $(($SYSTEM_USE+$RATE)) -gt 950 ] ; then
+        SYSTEM_USE=$((950-RATE))
+    fi
+}
+decode_status()
+{
+  S=$1
+  SOTG=$((S/128))
+  S=$((S-SOTG*128))
+
+  SSPIN=$((S/64))
+  S=$((S-SSPIN*64))
+
+  SSTAT=$((S/16))
+  S=$((S-SSTAT*16))
+
+  SBOOST=$((S/8))
+  S=$((S-SBOOST*8))
+
+  SFAULT=$((S))
+
+#  if [ $SSTAT -eq 0 ] ; then
+#    echo charger status: Ready 
+#  fi
+#  if [ $SSTAT -eq 1 ] ; then
+#    echo charger status: InProgress 
+#  fi
+#  if [ $SSTAT -eq 2 ] ; then
+#    echo charger status: Done 
+#  fi
+  if [ $SSTAT -eq 3 ] || [ $SFAULT -ne 0 ]; then
+    echo -n $(date) charger status: Fault: 
+    case $SFAULT in
+     0 )
+       echo NoFault  ;;
+     1 )
+       echo VbusOVP ;;
+     2 )
+       echo SleepMode ;;
+     3 )
+       echo Poor Input or VBus UnderVoltage ;;
+     4 )
+       echo Battery Overvoltage Protection ;;
+     5 )
+       echo Thermal Shutdown ;;
+     6 )
+       echo TimerFault ;;
+     7 )
+       echo Unknown ;;
+    esac
+  fi
+}
+
+
+SLEEPTIME=15
+
+while true ; do
+   STATUS=$($I2CGET -y 2 0x6b 0x00)
+   #echo $STATUS
+
+   $I2CSET -y -m 0x80 2 0x6b 0x00 0x80; # timer reset
+   get_nac
+   get_rsoc
+   get_volt
+   get_rate
+
+   # Sanity
+   if [ $VOLT -gt 4200 ] ; then
+      echo "***CRITICAL*** Battery voltage $VOLT exceeds 4.2V!!!"
+      exit 2
+   fi
+
+   if [ $MODE == "STANDBY" ] ; then
+      if [ $STATUS == 0x10 ] || [ $STATUS == 0x90 ] ; then
+         MODE="CHARGING" ; SLEEPTIME=5
+         echo $(date) "standby -> CHARGING. Current available capacity: " $NAC "mAh, " $RSOC " percent."
+         WALLCHARGER=$(cat /sys/devices/platform/musb_hdrc/charger)
+      fi
+   fi
+
+   if [ $MODE == "CHARGING" ] ; then
+      if [ $STATUS == 0x00 ] ; then
+         MODE="STANDBY" ; SLEEPTIME=15
+         echo $(date) "charging -> STANDBY. Current available capacity: " $NAC "mAh, " $RSOC " percent."
+         WALLCHARGER=0
+         # This will stop USB from eating power as long as you haven't plugged it into a PC
+#       ####  echo 0 > /sys/devices/platform/musb_hdrc/connect
+      fi
+   fi
+
+   if [ $STATUS == 0x20 ] && [ $FULL == 0 ] ; then
+      echo "Charge done"
+      #echo $(date) "FULL: " $NAC "mAh" >> /home/user/MyDocs/charger.log
+      FULL=1
+   fi
+
+   if [ $STATUS == 0x00 ] && [ $FULL == 1 ] ; then
+      FULL=0
+   fi
+
+   calculate_system_use
+   decode_status $STATUS
+   echo Status: $STATUS Mode: $MODE Full: $FULL Wall: $WALLCHARGER Voltage: $VOLT NAC: $NAC level: $RSOC % Rate: $RATE System: "-"$SYSTEM_USE Ch: $(($SYSTEM_USE+$RATE))
+   sleep $SLEEPTIME
+done
--- a/fs-overlay/rescueOS/enableftp.sh
+++ b/fs-overlay/rescueOS/enableftp.sh
@ -0,0 +1,2 @@
+#!/bin/sh
+tcpsvd -v 0.0.0.0 21 ftpd -w &
--- a/fs-overlay/rescueOS/enabletelnet.sh
+++ b/fs-overlay/rescueOS/enabletelnet.sh
@ -0,0 +1,3 @@
+#!/bin/sh
+#uhh..
+telnetd &
--- a/fs-overlay/rescueOS/fix-maemo-devnodes.sh
+++ b/fs-overlay/rescueOS/fix-maemo-devnodes.sh
@ -0,0 +1,183 @@
+#!/bin/sh
+#might fix some devices nodes if they have been messed up.
+#atm we don't care whether they exist already or not...
+#mknod parts by Pali
+
+sh /rescueOS/mount-maemo-root.sh
+if [ ! -e /run/maemo-root-mounted ] ; then
+echo "mount of maemo root failed, giving up."
+exit
+fi 
+
+
+mknod /mnt/maemo/dev/console c 5 1
+mknod /mnt/maemo/dev/fb0 c 29 0
+mknod /mnt/maemo/dev/fb1 c 29 1
+mknod /mnt/maemo/dev/fb2 c 29 2
+mknod /mnt/maemo/dev/full c 1 7
+mknod /mnt/maemo/dev/kmem c 1 2
+mknod /mnt/maemo/dev/mem c 1 1
+mknod /mnt/maemo/dev/mtd0 c 90 0
+mknod /mnt/maemo/dev/mtd0ro c 90 1
+mknod /mnt/maemo/dev/mtd1 c 90 2
+mknod /mnt/maemo/dev/mtd1ro c 90 3
+mknod /mnt/maemo/dev/mtd2 c 90 4
+mknod /mnt/maemo/dev/mtd2ro c 90 5
+mknod /mnt/maemo/dev/mtd3 c 90 6
+mknod /mnt/maemo/dev/mtd3ro c 90 7
+mknod /mnt/maemo/dev/mtd4 c 90 8
+mknod /mnt/maemo/dev/mtd4ro c 90 9
+mknod /mnt/maemo/dev/mtd5 c 90 10
+mknod /mnt/maemo/dev/mtd5ro c 90 11
+mknod /mnt/maemo/dev/null c 1 3
+mknod /mnt/maemo/dev/port c 1 4
+mknod /mnt/maemo/dev/random c 1 8
+mknod /mnt/maemo/dev/tty c 5 0
+mknod /mnt/maemo/dev/ttyS0 c 4 64
+mknod /mnt/maemo/dev/ttyS1 c 4 65
+mknod /mnt/maemo/dev/ttyS2 c 4 66
+mknod /mnt/maemo/dev/tty0 c 4 0
+mknod /mnt/maemo/dev/urandom c 1 9
+mknod /mnt/maemo/dev/zero c 1 5
+
+mknod /mnt/maemo/dev/loop0 b 7 0
+mknod /mnt/maemo/dev/loop1 b 7 1
+mknod /mnt/maemo/dev/loop2 b 7 2
+mknod /mnt/maemo/dev/loop3 b 7 3
+mknod /mnt/maemo/dev/loop4 b 7 4
+mknod /mnt/maemo/dev/loop5 b 7 5
+mknod /mnt/maemo/dev/loop6 b 7 6
+mknod /mnt/maemo/dev/loop7 b 7 7
+mknod /mnt/maemo/dev/ram0 b 1 0
+mknod /mnt/maemo/dev/ram1 b 1 1
+mknod /mnt/maemo/dev/ram10 b 1 10
+mknod /mnt/maemo/dev/ram11 b 1 11
+mknod /mnt/maemo/dev/ram12 b 1 12
+mknod /mnt/maemo/dev/ram13 b 1 13
+mknod /mnt/maemo/dev/ram14 b 1 14
+mknod /mnt/maemo/dev/ram15 b 1 15
+mknod /mnt/maemo/dev/ram16 b 1 16
+mknod /mnt/maemo/dev/ram2 b 1 2
+mknod /mnt/maemo/dev/ram3 b 1 3
+mknod /mnt/maemo/dev/ram4 b 1 4
+mknod /mnt/maemo/dev/ram5 b 1 5
+mknod /mnt/maemo/dev/ram6 b 1 6
+mknod /mnt/maemo/dev/ram7 b 1 7
+mknod /mnt/maemo/dev/ram8 b 1 8
+mknod /mnt/maemo/dev/ram9 b 1 9
+
+ln -s /proc/kcore /mnt/maemo/dev/core
+ln -s ram1 /mnt/maemo/dev/ram
+
+mkdir /mnt/maemo/dev/pts
+chmod 755 /mnt/maemo/dev/pts
+
+chmod 600 /mnt/maemo/dev/console
+chmod 660 /mnt/maemo/dev/fb0
+chmod 660 /mnt/maemo/dev/fb1
+chmod 660 /mnt/maemo/dev/fb2
+chmod 666 /mnt/maemo/dev/full
+chmod 640 /mnt/maemo/dev/kmem
+chmod 660 /mnt/maemo/dev/loop0
+chmod 660 /mnt/maemo/dev/loop1
+chmod 660 /mnt/maemo/dev/loop2
+chmod 660 /mnt/maemo/dev/loop3
+chmod 660 /mnt/maemo/dev/loop4
+chmod 660 /mnt/maemo/dev/loop5
+chmod 660 /mnt/maemo/dev/loop6
+chmod 660 /mnt/maemo/dev/loop7
+chmod 640 /mnt/maemo/dev/mem
+chmod 600 /mnt/maemo/dev/mtd0
+chmod 600 /mnt/maemo/dev/mtd0ro
+chmod 600 /mnt/maemo/dev/mtd1
+chmod 600 /mnt/maemo/dev/mtd1ro
+chmod 600 /mnt/maemo/dev/mtd2
+chmod 600 /mnt/maemo/dev/mtd2ro
+chmod 600 /mnt/maemo/dev/mtd3
+chmod 600 /mnt/maemo/dev/mtd3ro
+chmod 600 /mnt/maemo/dev/mtd4
+chmod 600 /mnt/maemo/dev/mtd4ro
+chmod 600 /mnt/maemo/dev/mtd5
+chmod 600 /mnt/maemo/dev/mtd5ro
+chmod 666 /mnt/maemo/dev/null
+chmod 640 /mnt/maemo/dev/port
+chmod 660 /mnt/maemo/dev/ram0
+chmod 660 /mnt/maemo/dev/ram1
+chmod 660 /mnt/maemo/dev/ram10
+chmod 660 /mnt/maemo/dev/ram11
+chmod 660 /mnt/maemo/dev/ram12
+chmod 660 /mnt/maemo/dev/ram13
+chmod 660 /mnt/maemo/dev/ram14
+chmod 660 /mnt/maemo/dev/ram15
+chmod 660 /mnt/maemo/dev/ram16
+chmod 660 /mnt/maemo/dev/ram2
+chmod 660 /mnt/maemo/dev/ram3
+chmod 660 /mnt/maemo/dev/ram4
+chmod 660 /mnt/maemo/dev/ram5
+chmod 660 /mnt/maemo/dev/ram6
+chmod 660 /mnt/maemo/dev/ram7
+chmod 660 /mnt/maemo/dev/ram8
+chmod 660 /mnt/maemo/dev/ram9
+chmod 666 /mnt/maemo/dev/random
+chmod 666 /mnt/maemo/dev/tty
+chmod 660 /mnt/maemo/dev/ttyS0
+chmod 660 /mnt/maemo/dev/ttyS1
+chmod 660 /mnt/maemo/dev/ttyS2
+chmod 600 /mnt/maemo/dev/tty0
+chmod 444 /mnt/maemo/dev/urandom
+chmod 666 /mnt/maemo/dev/zero
+
+chown root:tty /mnt/maemo/dev/console
+chown root:video /mnt/maemo/dev/fb0
+chown root:video /mnt/maemo/dev/fb1
+chown root:video /mnt/maemo/dev/fb2
+chown root:root /mnt/maemo/dev/full
+chown root:kmem /mnt/maemo/dev/kmem
+chown root:disk /mnt/maemo/dev/loop0
+chown root:disk /mnt/maemo/dev/loop1
+chown root:disk /mnt/maemo/dev/loop2
+chown root:disk /mnt/maemo/dev/loop3
+chown root:disk /mnt/maemo/dev/loop4
+chown root:disk /mnt/maemo/dev/loop5
+chown root:disk /mnt/maemo/dev/loop6
+chown root:disk /mnt/maemo/dev/loop7
+chown root:kmem /mnt/maemo/dev/mem
+chown root:root /mnt/maemo/dev/mtd0
+chown root:root /mnt/maemo/dev/mtd0ro
+chown root:root /mnt/maemo/dev/mtd1
+chown root:root /mnt/maemo/dev/mtd1ro
+chown root:root /mnt/maemo/dev/mtd2
+chown root:root /mnt/maemo/dev/mtd2ro
+chown root:root /mnt/maemo/dev/mtd3
+chown root:root /mnt/maemo/dev/mtd3ro
+chown root:root /mnt/maemo/dev/mtd4
+chown root:root /mnt/maemo/dev/mtd4ro
+chown root:root /mnt/maemo/dev/mtd5
+chown root:root /mnt/maemo/dev/mtd5ro
+chown root:root /mnt/maemo/dev/null
+chown root:kmem /mnt/maemo/dev/port
+chown root:disk /mnt/maemo/dev/ram0
+chown root:disk /mnt/maemo/dev/ram1
+chown root:disk /mnt/maemo/dev/ram10
+chown root:disk /mnt/maemo/dev/ram11
+chown root:disk /mnt/maemo/dev/ram12
+chown root:disk /mnt/maemo/dev/ram13
+chown root:disk /mnt/maemo/dev/ram14
+chown root:disk /mnt/maemo/dev/ram15
+chown root:disk /mnt/maemo/dev/ram16
+chown root:disk /mnt/maemo/dev/ram2
+chown root:disk /mnt/maemo/dev/ram3
+chown root:disk /mnt/maemo/dev/ram4
+chown root:disk /mnt/maemo/dev/ram5
+chown root:disk /mnt/maemo/dev/ram6
+chown root:disk /mnt/maemo/dev/ram7
+chown root:disk /mnt/maemo/dev/ram8
+chown root:disk /mnt/maemo/dev/ram9
+chown root:root /mnt/maemo/dev/random
+chown root:tty /mnt/maemo/dev/tty
+chown root:dialout /mnt/maemo/dev/ttyS0
+chown root:dialout /mnt/maemo/dev/ttyS1
+chown root:dialout /mnt/maemo/dev/ttyS2
+chown root:tty /mnt/maemo/dev/tty0
+chown root:root /mnt/maemo/dev/urandom
+chown root:root /mnt/maemo/dev/zero
--- a/fs-overlay/rescueOS/mass-storage-disable.sh
+++ b/fs-overlay/rescueOS/mass-storage-disable.sh
@ -0,0 +1,2 @@
+#!/bin/sh
+rmmod g_file_storage
--- a/fs-overlay/rescueOS/mass-storage-enable.sh
+++ b/fs-overlay/rescueOS/mass-storage-enable.sh
@ -0,0 +1,7 @@
+#!/bin/bash
+rmmod g_nokia 
+nodenr=$(cat /run/internal_nodenr)
+modprobe g_file_storage file=/dev/mmcblk"$nodenr"p2,/dev/mmcblk"$nodenr"p1 stall=0 removable=1
+
+
+
--- a/fs-overlay/rescueOS/mount-maemo-root.sh
+++ b/fs-overlay/rescueOS/mount-maemo-root.sh
@ -0,0 +1,8 @@
+#!/bin/sh
+[ -d /mnt/maemo ] || mkdir /mnt/maemo/
+if [ -e /run/maemo-root-mounted ] ; then
+echo "A system script already mounted the rootfs of maemo to /mnt/maemo" ;
+exit ; 
+fi 
+ubiattach /dev/ubi_ctrl -m 5
+mount -t ubifs -o rw,bulk_read,no_chk_data_crc ubi0:rootfs /mnt/maemo && touch /run/maemo-root-mounted
--- a/fs-overlay/rescueOS/nokia-n900.kmap
+++ b/fs-overlay/rescueOS/nokia-n900.kmap
--- a/fs-overlay/rescueOS/rcS
+++ b/fs-overlay/rescueOS/rcS
@ -0,0 +1 @@
+/etc/init.d/rcS
--- a/fs-overlay/rescueOS/setup-wpa-wifi.sh
+++ b/fs-overlay/rescueOS/setup-wpa-wifi.sh
@ -0,0 +1,13 @@
+#!/bin/sh
+ermsg()
+{
+echo $1
+exit
+}
+[ -e /run/wlan.conf ] ||  ermsg "Yeah, please run wpa_passphrase [essid] [password ] > /run/wlan.conf first."
+modprobe wl1251_spi
+#Works for my router, probably for yours too, if not, then not :-)
+
+sleep 1;
+wpa_supplicant -Dwext -iwlan0 -c/run/wlan.conf &
+
--- a/fs-overlay/rescueOS/shutdown-cleanup
+++ b/fs-overlay/rescueOS/shutdown-cleanup
@ -0,0 +1,35 @@
+umount_maemo()
+{
+sync
+umount /mnt/maemo
+ubidetach /dev/ubi_ctrl -d 0
+}
+cd /
+
+
+echo "Sending all processes the TERM signal..."
+kill -15 -1
+umount_maemo
+
+sleep 1
+echo "Sending all processes the KILL signal..."
+kill -9 -1
+
+umount_maemo
+
+
+
+echo "Unmounting  filesystems..."
+umount -a -r 2> /dev/null  
+
+
+sync
+
+#reset timer.
+sleep 3 
+[ -f /run/charger-runned ] && i2cset -y -m 0x80 2 0x6b 0x04 0x80
+sleep 1
+echo 
+echo "RescueOS says good bye - have a good day."
+sleep 3
+poweroff -f
--- a/fs-overlay/rescueOS/umount-maemo-root.sh
+++ b/fs-overlay/rescueOS/umount-maemo-root.sh
@ -0,0 +1,11 @@
+#!/bin/sh
+ermsg()
+{
+echo "Couldn't unmount. Most likely your fault. Are you in /mnt/maemo?";
+exit;
+}
+
+sync
+umount /mnt/maemo || ermsg 
+ubidetach /dev/ubi_ctrl -d 0
+rm /run/maemo-root-mounted
--- a/fs-overlay/rescueOS/usbnetworking-disable.sh
+++ b/fs-overlay/rescueOS/usbnetworking-disable.sh
@ -0,0 +1,3 @@
+#!/bin/sh
+#Yeah...
+rmmod g_nokia
--- a/fs-overlay/rescueOS/usbnetworking-enable.sh
+++ b/fs-overlay/rescueOS/usbnetworking-enable.sh
@ -0,0 +1,8 @@
+#!/bin/sh
+sh /rescueOS/mass-storage-disable.sh 
+modprobe g_nokia
+ifconfig usb0 down
+ifconfig usb0 192.168.2.15 up
+ifconfig usb0 netmask 255.255.255.0
+#route add default gw 192.168.178.14  
+route add 192.168.2.14 usb0
--- a/fs-overlay/sbin/battery-watchdog
+++ b/fs-overlay/sbin/battery-watchdog
@ -0,0 +1,28 @@
+#!/bin/sh
+#Modified, we warn only now....
+#fill_charger()
+#{
+#usb=`cat /sys/bus/platform/devices/twl4030_usb/vbus`
+#wall=`cat /sys/bus/platform/devices/musb_hdrc/charger`
+#if [ "$usb" = "on" ] || [ "$wall" = 1 ] ; then
+#charger=1
+#else
+#charger=0 
+#fi
+#}
+while [ true ] ; do
+cap=`cat /sys/class/power_supply/bq27200-0/capacity`
+#fill_charger
+#if [ $cap -le 55 -a $charger -eq 0 ] ; then
+if [ $cap -le 45 ] ; then
+#echo "Attention: Plugin the charger soon to not run out of power. Current: $cap%. To disable this message, type \"stfu\""
+echo "Attention: Charge the battery (by running the charger script) to not run out of power. Current: $cap%. To disable this message, type \"stfu\"" 
+fi
+sleep 20
+done
+
+
+
+
+
+
--- a/fs-overlay/sbin/mdev.sh
+++ b/fs-overlay/sbin/mdev.sh
@ -0,0 +1,3 @@
+#!/bin/sh
+[ -e /lib/firmware/$FIRMWARE ] || echo -1 > /sys/$DEVPATH/loading
+/sbin/mdev
--- a/fs-overlay/sbin/stfu
+++ b/fs-overlay/sbin/stfu
@ -0,0 +1,2 @@
+#!/bin/sh
+killall battery-watchdog
--- a/fs-overlay/usr/share/udhcpc/default.script
+++ b/fs-overlay/usr/share/udhcpc/default.script
@ -0,0 +1,46 @@
+#!/bin/sh
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+RESOLV_CONF="/etc/resolv.conf"
+
+[ -n "$1" ] || { echo "Error: should be called from udhcpc"; exit 1; }
+
+NETMASK=""
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+BROADCAST="broadcast +"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+
+case "$1" in
+	deconfig)
+		echo "Setting IP address 0.0.0.0 on $interface"
+		ifconfig $interface 0.0.0.0
+		;;
+
+	renew|bound)
+		echo "Setting IP address $ip on $interface"
+		ifconfig $interface $ip $NETMASK $BROADCAST
+
+		if [ -n "$router" ] ; then
+			echo "Deleting routers"
+			while route del default gw 0.0.0.0 dev $interface ; do
+				:
+			done
+
+			metric=0
+			for i in $router ; do
+				echo "Adding router $i"
+				route add default gw $i dev $interface metric $((metric++))
+			done
+		fi
+
+		echo "Setting $RESOLV_CONF"
+		[ -n "$domain" ] && echo "search $domain" >> $RESOLV_CONF
+		for i in $dns ; do
+			echo " Adding DNS server $i"
+			echo "nameserver $i" >> $RESOLV_CONF
+		done
+		;;
+esac
+
+exit 0
+
--- a/kernel-patches/0001-net-wireless-wl1251-update-firmware-path.patch
+++ b/kernel-patches/0001-net-wireless-wl1251-update-firmware-path.patch
@ -0,0 +1,36 @@
+From 4dc2cc73fa172892f817440877565018aa2f07c9 Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <balbi@ti.com>
+Date: Wed, 2 Oct 2013 08:00:48 -0500
+Subject: [PATCH] net: wireless: wl1251: update firmware path
+
+Backported from 9f55c6201354183345fa06c6986668d159b6507f
+
+TI firmwares are located under ti-connectivity
+directory. Update path to make sure driver can
+find and load firmware blob.
+
+Signed-off-by: Felipe Balbi <balbi@ti.com>
+Signed-off-by: John W. Linville <linville@tuxdriver.com>
+Backported-by: Daniel Gnoutcheff <daniel@gnoutcheff.name>
+---
+ drivers/net/wireless/wl1251/wl1251.h | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
+index a7f98a7..f705b5d 100644
+--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
+@@ -425,8 +425,8 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
+ #define CHIP_ID_1271_PG10	           (0x4030101)
+ #define CHIP_ID_1271_PG20	           (0x4030111)
+ 
+-#define WL1251_FW_NAME "wl1251-fw.bin"
+-#define WL1251_NVS_NAME "wl1251-nvs.bin"
+#define WL1251_FW_NAME "ti-connectivity/wl1251-fw.bin"
+#define WL1251_NVS_NAME "ti-connectivity/wl1251-nvs.bin"
+ 
+ #define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+ 
+-- 
+1.9.1
+
--- a/2152
+++ b/2152
--- a/post-build.sh
+++ b/post-build.sh
@ -0,0 +1,17 @@
+#!/bin/bash
+
+set -e
+
+target="$1"
+
+delfiles="
+  $target/etc/init.d/rcK
+  $target/etc/init.d/S20urandom
+  $target/etc/init.d/S40network
+  $target/etc/securetty"
+
+for file in $delfiles ; do 
+  [ ! -e "$file" ] || rm "$file"
+done
+
+[ ! -e "$target/usr/share/getopt" ] || rm -r "$target/usr/share/getopt"
				`@ -0,0 +1 @@`
				`root:$1$sz.20p5a$c40FElyGq0cIfHXeQQChQ/:0:0:root:/root:/bin/bash`
				`@ -0,0 +1 @@`
				`Apparently most scripts here are not completed, dumb and based on assumptations. Use them if you know what you are doing...`