Commit-Graf

129 Incheckningar

Upphovsman SHA1 Meddelande Datum
Matt Comben
39735d95ca Renamed repo-specific configuration for enable-html-serving in cgitrc.5.txt 2016-03-08 14:42:26 +01:00
Jason A. Donenfeld
5f2664f13c ui-shared: add homepage to tabs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2016-02-22 18:40:13 +01:00
Jason A. Donenfeld
c326f3eb02 ui-plain: add enable-html-serving flag
Unrestricts plain/ to contents likely to be executed by browser.
2016-01-14 15:42:56 +01:00
John Keeping
30304d8156 log: allow users to follow a file
Teach the "log" UI to behave in the same way as "git log --follow", when
given a suitable instruction by the user.  The default behaviour remains
to show the log without following renames, but the follow behaviour can
be activated by following a link in the page header.

Follow is not the default because outputting merges in follow mode is
tricky ("git log --follow" will not show merges).  We also disable the
graph in follow mode because the commit graph is not simplified so we
end up with frequent gaps in the graph and many lines that do not
connect with any commits we're actually showing.

We also teach the "diff" and "commit" UIs to respect the follow flag on
URLs, causing the single-file version of these UIs to detect renames.
This feature is needed only for commits that rename the path we're
interested in.

For commits before the file has been renamed (i.e. that appear later in
the log list) we change the file path in the links from the log to point
to the old name; this means that links to commits always limit by the
path known to that commit.  If we didn't do this we would need to walk
down the log diff'ing every commit whenever we want to show a commit.
The drawback is that the "Log" link in the top bar of such a page links
to the log limited by the old name, so it will only show pre-rename
commits.  I consider this a reasonable trade-off since the "Back" button
still works and the log matches the path displayed in the top bar.

Since following renames requires running diff on every commit we
consider, I've added a knob to the configuration file to globally
enable/disable this feature.  Note that we may consider a large number
of commits the revision walking machinery no longer performs any path
limitation so we have to examine every commit until we find a page full
of commits that affect the target path or something related to it.

Suggested-by: René Neumann <necoro@necoro.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
2015-08-12 16:57:46 +02:00
Lukas Fleischer
c58cec9dff Add repo.hide and repo.ignore
These options can be used to hide a repository from the index or
completely ignore a repository, respectively. They are particularly
useful when used in combination with scan-path.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2015-01-29 16:41:14 +01:00
Chris Burroughs
96ceb9a95a repolist: add owner-filter
This allows custom links to be used for repository owners by
configuring a filter to be applied in the "Owner" column in the
repository list.
2014-12-23 19:08:20 -07:00
Jason A. Donenfeld
efa2879ad7 cgitrc.5: we mean a cgi response, not request 2014-08-01 17:37:27 +02:00
Christian Hesse
b431282c91 remove trailing whitespaces from source files 2014-04-17 12:55:09 +02:00
Jason A. Donenfeld
2e8e9af1d4 Clean up cache documentation.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-02-21 01:36:20 +01:00
Lukas Fleischer
6ceba453a2 Skip cache slot when time-to-live is zero
If time-to-live is set to zero, we don't need to regenerate the cache
slots on every request. Instead, just skip the caching process and
immediately provide the dynamically generated version of the page.
Setting time-to-live to zero is useful when you want to disable caching
for certain pages.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2014-02-21 01:19:45 +01:00
Lukas Fleischer
a3722ec3c6 Add a cache-snapshot-ttl configuration variable
This can be used to specify the TTL for snapshots. Snapshots are usually
static and do not ever change. On the other hand, tarball generation is
CPU intensive.

One use case of this setting (apart from increasing the lifetime of
snapshot cache slots) is caching of snapshots while disabling the cache
for static/dynamic HTML pages (by setting TTL to zero for everything
except for snapshot requests).

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2014-02-20 19:56:44 +01:00
Jason A. Donenfeld
a431326e8f auth: have cgit calculate login address
This way we're sure to use virtual root, or any other strangeness
encountered.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-16 23:21:54 +01:00
Jason A. Donenfeld
b826537cb4 authentication: use hidden form instead of referer
This also gives us some CSRF protection. Note that we make use of the
hmac to protect the redirect value.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-16 12:13:39 +01:00
Jason A. Donenfeld
d6e9200cc3 auth: add basic authentication filter framework
This leverages the new lua support. See
filters/simple-authentication.lua for explaination of how this works.
There is also additional documentation in cgitrc.5.txt.

Though this is a cookie-based approach, cgit's caching mechanism is
preserved for authenticated pages.

Very plugable and extendable depending on user needs.

The sample script uses an HMAC-SHA1 based cookie to store the
currently logged in user, with an expiration date.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-16 02:28:12 +01:00
Jason A. Donenfeld
6ca734da8f filter: allow returning exit code from filter
Filters can now indicate a status back to cgit by means of the exit code
for exec, or the return value from close for Lua.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-14 18:09:52 +01:00
Lukas Fleischer
70546a3458 cgitrc.5.txt: Fix documentation of the snapshot mask
Mention that the snapshot setting only specifies the formats that links
are generated for and not the set of formats that are accessible via
HTTP.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2014-01-14 02:30:01 +01:00
Jason A. Donenfeld
786609bd36 filter: add page source to email filter
Since the email filter is called from lots of places, the script might
benefit from knowing the origin. That way it can modify its contents
and/or size depending.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-14 02:00:07 +01:00
Jason A. Donenfeld
a5e1553726 filter: add support for email filter
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-14 02:00:07 +01:00
Jason A. Donenfeld
f43b228d0b filter: add lua support
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2014-01-14 02:00:07 +01:00
John Keeping
4bb87cbf17 filter: introduce "filter type" prefix
This allows different filter implementations to be specified in the
configuration file.  Currently only "exec" is supported, but it may now
be specified either with or without the "exec:" prefix.

Signed-off-by: John Keeping <john@keeping.me.uk>
2014-01-14 02:00:07 +01:00
Přemysl Janouch
4f6fb32f58 Add a suggestion to the manpage
So that people wishing to use "enable-http-clone" don't have to find
out the correct settings on their own.

Signed-off-by: Přemysl Janouch <p.janouch@gmail.com>
2014-01-08 16:48:02 +01:00
Přemysl Janouch
17e6a2af9d Fix the example configuration
"enable-git-clone" doesn't exist, replaced with "enable-http-clone".

Signed-off-by: Přemysl Janouch <p.janouch@gmail.com>
2014-01-08 16:47:23 +01:00
Přemysl Janouch
88028ad597 Fix some spelling errors
Signed-off-by: Přemysl Janouch <p.janouch@gmail.com>
2014-01-08 16:45:42 +01:00
Jason A. Donenfeld
cf152604c3 Fix silly spelling error. 2013-08-16 13:15:17 -06:00
Christian Hesse
820df9c660 add a note about generating agefile in hook 2013-08-12 13:14:10 -06:00
Jason A. Donenfeld
61ff10065b cache: document negative ttls and add about ttl
We've long supported negative ttls, for infinite cache, except the
documentation incorrectly showed one of our defaults as being 5 and not
-1. As well, with a negative ttl, we were actually making the HTTP
expired header go backwards. This changes it to go ahead ten years
instead.

Further, we add an cache-about-ttl option to set a different ttl for
about pages, which are now increasingly being filtered through markdown
or just sent statically anyway.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-08-12 13:14:10 -06:00
Christian Hesse
830eb6f6ff use favicon by default 2013-08-12 12:44:44 -06:00
Jason A. Donenfeld
d6d3dbc858 cgitrc.5: improve example config
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-27 21:54:16 +02:00
Jason A. Donenfeld
dcbc0438b2 readme: use string_list instead of space deliminations
Now this is possible in cgitrc -

readme=:README.md
readme=:readme.md
readme=:README.mkd
readme=:readme.mkd
readme=:README.rst
readme=:readme.rst
readme=:README.html
readme=:readme.html
readme=:README.htm
readme=:readme.htm
readme=:README.txt
readme=:readme.txt
readme=:README
readme=:readme
readme=:INSTALL.txt
readme=:install.txt
readme=:INSTALL
readme=:install

Suggested-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-26 16:30:03 +02:00
Jason A. Donenfeld
2a1ead3efb cgitrc.5: information on directory traversal and multiple readme files
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25 20:33:28 +02:00
Jason A. Donenfeld
c0dfaf1c28 ui-summary: Pass filename to about-filter
This gives the about-filter API the same semantics as source-filter,
where the filter receives the filename so it can decide what to do next
with it.

While we're at it, plug a memory leak.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25 20:33:28 +02:00
Jason A. Donenfeld
3cb5d86dc6 ui-summary: Use default branch for readme if : prefix
If the readme value begins with ":", and has no specified branch before
it, use the repository's default branch.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-05-25 20:33:28 +02:00
Jason A. Donenfeld
a8d613efdc cgitrc.5.txt: Specify when scan-path must be defined before.
Several options must be specified prior to scan-path. This is consistant
source of user confusion. Document these facts.

Suggested-by: Lukas Fleischer <cgit@cryptocrack.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-04-10 14:49:31 +02:00
Jason A. Donenfeld
389cc17357 Add branch-sort and repo.branch-sort options.
When set to "name", branches are sorted by name, which is the current
default. When set to "age", branches are sorted by the age of the
repository.

This feature was requested by Konstantin Ryabitsev for use on
kernel.org.

Proposed-by: Konstantin Ryabitsev <mricon@kernel.org>
2013-04-10 14:48:26 +02:00
Florian Pritz
b1e172acca Make "owner" column on index page configurable
This is not really needed for personal sites where all repos belong to
the same person. Since it is pretty useful for shared sites however, it
should be configurable.

Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2013-02-01 12:50:24 +01:00
Jason A. Donenfeld
c6f5bc7264 man: fix up default value duplication 2012-11-15 17:21:47 +01:00
Jason A. Donenfeld
ab9805aa86 man: show mime type default value 2012-11-15 01:26:06 +01:00
Jason A. Donenfeld
37141051ed Fix man page typo. 2012-10-18 23:36:44 +02:00
Tobias Bieniek
792f813d34 ui-log: Add "commit-sort" option for controlling commit ordering
This makes it possible to use strict commit date ordering or strict
topological ordering by passing the corresponding flags to "git log".

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-17 16:30:29 +02:00
Tobias Bieniek
7a4e7c8ffb ui-repolist: Add "section-sort" flag to control section sorting.
Flag which, when set to "1", will sort the sections on the repository
listing by name. Set this flag to "0" if the order in the cgitrc file
should be preserved. Default value: "1".

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-17 16:30:22 +02:00
Jason A. Donenfeld
521e10c884 scan-tree: Unify gitweb.* and cgit.* settings into one config option.
After some back and forth with Jamie and René, it looks like the git
config semantics are going to be like this:

- gitweb.category maps to the cgit repo config key "section"
- gitweb.description maps to the cgit repo config key "desc"
- gitweb.owner maps to the cgit repo config key "owner"
- cgit.* maps to all cgit repo config keys

This option can be enabled with "enable-git-config=1", and replaces
all previous "enable-gitweb-*" config keys.

The order of operations is as follows:

- git config settings are applied in the order that they exist in
  the git config file
- if the owner is not set from git config, get the owner using the
  usual getpwuid call
- if the description is not set from git config, look inside the
  static $path/description file
- if section-from-path=1, override whatever previous settings were
  inside of git config using the section-from-path logic
- parse $path/cgitrc for local repo.* settings, that override all
  previous settings
2012-10-17 16:30:09 +02:00
Jason A. Donenfeld
fdfb6a6d80 ui-repolist: Rename section-sort to repository-sort.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2012-10-16 23:32:53 +02:00
Jason A. Donenfeld
184c5655b2 ui-repolist: Case insensitive sorting and age sort
Add two options, one for doing the ordinary name sorts in a
case-insensitive manner, and another for choosing to sort repos in each
section by age instead of by name.
2012-07-12 20:01:46 +02:00
Jason A. Donenfeld
fc9181ff3d scan-tree: Support gitweb.category.
Use gitweb.category from git config to determine repo's section, if
option is enabled.
2012-07-12 20:01:46 +02:00
Jason A. Donenfeld
b56be4ba3a scan-tree: Support gitweb.description.
Use gitweb.description instead of description file to determine
description, if option is enabled.
2012-07-12 20:01:46 +02:00
Lars Hjemli
ae90a0b2d1 Merge branch 'fh/mimetypes' 2012-03-18 21:01:28 +00:00
Lars Hjemli
181b6e789b Merge branch 'jp/defbranch' 2012-03-18 21:00:18 +00:00
Lars Hjemli
2b9fab8d30 Merge branch 'lh/module-links' 2012-03-18 20:59:36 +00:00
Lukas Fleischer
d96d2c98eb shared.c: Only setenv() if value is non-null
Some setenv() implementations (e.g. the one in OpenBSD's stdlib)
segfault if we pass a NULL value. Only set environment variables if the
corresponding settings are defined to avoid this.

Note that this is a minor behaviour change as environment variables were
supposed to be set to an empty string if a setting was undefined. Given
that this feature isn't part of any official release yet, there's no
need to worry about backwards compatibility, really. Change the
documentation accordingly.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
2012-01-03 14:59:36 +00:00
Ferry Huberts
d01c600c17 ui_plain: automatically lookup mimetype when mimetype-file is set
For sites that do not want to configure mime types by hand but
still want the correct mime type for 'plain' blobs, configuring
a mime type file is made possible. This is handy since such a
file is normally already provided (at least on Linux systems).

Also, this reflects the gitweb option '$mimetypes_file'

Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
2011-07-19 09:30:07 +00:00