commit cd735064de9395b61bdb501f0e849a0fad5a5528
Author: NIN101 <NIN101@lavabit.com>
Date:   Sat Mar 23 21:56:55 2013 +0100

    Added /rescueOS

diff --git a/rescueOS/README b/rescueOS/README
new file mode 100644
index 0000000..b5a5d16
--- /dev/null
+++ b/rescueOS/README
@@ -0,0 +1 @@
+Apparently most scripts here are not completed, dumb and  based on assumptations. Use them if you know what you are doing...
diff --git a/rescueOS/charge21.bash b/rescueOS/charge21.bash
new file mode 100755
index 0000000..22fccf0
--- /dev/null
+++ b/rescueOS/charge21.bash
@@ -0,0 +1,236 @@
+#/bin/bash
+#Original by ShadowJK. http://enivax.net/jk/n900/ 
+if [ -e /run/charger-runned ] ; then
+echo "Script already started. Delete run/charger-runned if you are sure no other instance is running"
+exit
+fi
+touch /run/charger-runned
+echo "Charger: " $(cat /sys/devices/platform/musb_hdrc/charger)
+
+I2CGET=/usr/bin/i2cget
+I2CSET=/usr/bin/i2cset
+
+if pgrep bme_RX-51; then
+	echo "BME is running. Exiting."
+	exit
+fi
+
+configure()
+{
+  echo -n "Pre-Config Status: " $($I2CGET -y 2 0x6b 0x00)
+  echo -n ", " $($I2CSET -y 2 0x6b 0x00) "." 
+
+  # Disable charger for configuration:
+  # $I2CSET -y 2 0x6b 0x01 0xcc # No limit, 3.4V weak threshold, enable term, charger disable
+
+  # Register 0x04
+  # 8: reset
+  # 4: 27.2mV  # charge current
+  # 2: 13.6mV
+  # 1: 6.8mV
+  # 8: N/A
+  # 4: 13.6mV # termination current
+  # 2: 6.8mV
+  # 1: 3.4mV
+  # 7-1250 6-1150 5-1050 4-950 3-850 2-750 1-650 0-550
+  # 7-400 6-350 5-300 4-250 3-200 2-150 1-100 0-50
+  $I2CSET -y -m 0xFF 2 0x6b 0x04 0x42;
+
+  # Register 0x02
+  # 8: .640 V
+  # 4: .320 V
+  # 2: .160 V
+  # 1: .080
+  # 8: .040
+  # 4: .020 (+ 3.5)
+  # 2: otg pin active at high (default 1)
+  # 1: enable otg pin
+  $I2CSET -y -m 0xfc 2 0x6b 0x02 0x8c; 
+  REGV=4200
+  # 4.24 = 3.5 + .640 + .08 + .02 = 94 
+  # 4.22 = 3.5 + ,640 + .08 = 90
+  # 4.2 = 3.5 + .640 + .040 + .02 = 8c
+  # 4.16 = 3.5 + .640V + .020 = 84
+  # 4.1 = 3.5 + .320 + .160 + .08 + .04 = 78
+  # 4.0 = 3.5 + .320 + .160 + .02 = 64
+  # 3.9 = 3.5 + .320 + .080 = 50
+
+  # Register 0x1
+  # 8: 00 = 100, 01 = 500, 10 = 800mA
+  # 4: 11 = no limit
+  # 2: 200mV weak threshold default 1
+  # 1: 100mV weak treshold defsult 1 (3.4 - 3.7)
+  # 8: enable termination
+  # 4: charger disable
+  # 2: high imp mode
+  # 1: boost
+  $I2CSET -y 2 0x6b 0x01 0x08; 
+  #hotswap: c0
+  #normal: c8
+
+
+  # Register 0x00
+  # 8: Read:  OTG Pin Status
+  #    Write: Timer Reset
+  # 4: Enable Stat Pin
+  # 2: Stat : 00 Ready 01 In Progress
+  # 1:      : 10 Done  11 Fault
+  # 8: Boost Mode
+  # 4: Fault: 000 Normal 001 VBUS OVP 010 Sleep Mode 
+  # 2:        011 Poor input or Vbus < UVLO 
+  # 1:        100 Battery OVP 101 Thermal Shutdown
+  #           110 Timer Fault 111 NA
+  $I2CSET -y 2 0x6b 0x00 0x00; 
+
+  # Softstart
+
+  $I2CSET -y 2 0x6b 0x01 0xc8;
+  sleep 1
+  #echo " Unlimited: " $($I2CGET -y 2 0x6b 0x00)
+  #$I2CSET -y 2 0x6b 0x00 0x80 # timer reset
+  cat /sys/devices/platform/musb_hdrc/charger >/dev/null
+}
+
+configure
+
+# Initialize variables
+FULL=0
+MODE="STANDBY"
+WALLCHARGER=0
+
+# Assuming a nice round number 20mOhm for bq27200 sense resistor
+RS=21
+
+# Assuming this much resistance between charger and battery
+CR=131
+
+BQPATH="/sys/class/power_supply/bq27200-0"
+
+get_nac ()
+{
+    NAC=$(cat $BQPATH/charge_now)
+    NAC=$((NAC/1000))
+}
+get_rsoc ()
+{
+    RSOC=$(cat $BQPATH/capacity)
+}
+get_volt ()
+{
+   VOLT=$(cat $BQPATH/voltage_now)
+   VOLT=$((VOLT/1000))
+}
+get_rate ()
+{
+    RATE=$(cat $BQPATH/current_now)
+    RATE=$((RATE/1000))
+    RATE=$((-RATE))
+}
+calculate_system_use ()
+{
+    SYSTEM_USE=$(( ($REGV *1000 - $VOLT*1000) / $CR - $RATE ))
+    if [ $(($SYSTEM_USE+$RATE)) -gt 950 ] ; then
+        SYSTEM_USE=$((950-RATE))
+    fi
+}
+decode_status()
+{
+  S=$1
+  SOTG=$((S/128))
+  S=$((S-SOTG*128))
+
+  SSPIN=$((S/64))
+  S=$((S-SSPIN*64))
+
+  SSTAT=$((S/16))
+  S=$((S-SSTAT*16))
+
+  SBOOST=$((S/8))
+  S=$((S-SBOOST*8))
+
+  SFAULT=$((S))
+
+#  if [ $SSTAT -eq 0 ] ; then
+#    echo charger status: Ready 
+#  fi
+#  if [ $SSTAT -eq 1 ] ; then
+#    echo charger status: InProgress 
+#  fi
+#  if [ $SSTAT -eq 2 ] ; then
+#    echo charger status: Done 
+#  fi
+  if [ $SSTAT -eq 3 ] || [ $SFAULT -ne 0 ]; then
+    echo -n $(date) charger status: Fault: 
+    case $SFAULT in
+     0 )
+       echo NoFault  ;;
+     1 )
+       echo VbusOVP ;;
+     2 )
+       echo SleepMode ;;
+     3 )
+       echo Poor Input or VBus UnderVoltage ;;
+     4 )
+       echo Battery Overvoltage Protection ;;
+     5 )
+       echo Thermal Shutdown ;;
+     6 )
+       echo TimerFault ;;
+     7 )
+       echo Unknown ;;
+    esac
+  fi
+}
+
+
+SLEEPTIME=15
+
+while true ; do
+   STATUS=$($I2CGET -y 2 0x6b 0x00)
+   #echo $STATUS
+
+   $I2CSET -y -m 0x80 2 0x6b 0x00 0x80; # timer reset
+   get_nac
+   get_rsoc
+   get_volt
+   get_rate
+
+   # Sanity
+   if [ $VOLT -gt 4200 ] ; then
+      echo "***CRITICAL*** Battery voltage $VOLT exceeds 4.2V!!!"
+      exit 2
+   fi
+
+   if [ $MODE == "STANDBY" ] ; then
+      if [ $STATUS == 0x10 ] || [ $STATUS == 0x90 ] ; then
+         MODE="CHARGING" ; SLEEPTIME=5
+         echo $(date) "standby -> CHARGING. Current available capacity: " $NAC "mAh, " $RSOC " percent."
+         WALLCHARGER=$(cat /sys/devices/platform/musb_hdrc/charger)
+      fi
+   fi
+
+   if [ $MODE == "CHARGING" ] ; then
+      if [ $STATUS == 0x00 ] ; then
+         MODE="STANDBY" ; SLEEPTIME=15
+         echo $(date) "charging -> STANDBY. Current available capacity: " $NAC "mAh, " $RSOC " percent."
+         WALLCHARGER=0
+         # This will stop USB from eating power as long as you haven't plugged it into a PC
+#       ####  echo 0 > /sys/devices/platform/musb_hdrc/connect
+      fi
+   fi
+
+   if [ $STATUS == 0x20 ] && [ $FULL == 0 ] ; then
+      echo "Charge done"
+      #echo $(date) "FULL: " $NAC "mAh" >> /home/user/MyDocs/charger.log
+      FULL=1
+   fi
+
+   if [ $STATUS == 0x00 ] && [ $FULL == 1 ] ; then
+      FULL=0
+   fi
+
+   calculate_system_use
+   decode_status $STATUS
+   echo Status: $STATUS Mode: $MODE Full: $FULL Wall: $WALLCHARGER Voltage: $VOLT NAC: $NAC level: $RSOC % Rate: $RATE System: "-"$SYSTEM_USE Ch: $(($SYSTEM_USE+$RATE))
+   sleep $SLEEPTIME
+done
diff --git a/rescueOS/fix-maemo-devnodes.sh b/rescueOS/fix-maemo-devnodes.sh
new file mode 100755
index 0000000..4357e0e
--- /dev/null
+++ b/rescueOS/fix-maemo-devnodes.sh
@@ -0,0 +1,183 @@
+#!/bin/sh
+#might fix some devices nodes if they have been messed up.
+#atm we don't care whether they exist already or not...
+#mknod parts by Pali
+
+sh /rescueOS/mount-maemo-root.sh
+if [ ! -e /run/maemo-root-mounted ] ; then
+echo "mount of maemo root failed, giving up."
+exit
+fi 
+
+
+mknod /mnt/maemo/dev/console c 5 1
+mknod /mnt/maemo/dev/fb0 c 29 0
+mknod /mnt/maemo/dev/fb1 c 29 1
+mknod /mnt/maemo/dev/fb2 c 29 2
+mknod /mnt/maemo/dev/full c 1 7
+mknod /mnt/maemo/dev/kmem c 1 2
+mknod /mnt/maemo/dev/mem c 1 1
+mknod /mnt/maemo/dev/mtd0 c 90 0
+mknod /mnt/maemo/dev/mtd0ro c 90 1
+mknod /mnt/maemo/dev/mtd1 c 90 2
+mknod /mnt/maemo/dev/mtd1ro c 90 3
+mknod /mnt/maemo/dev/mtd2 c 90 4
+mknod /mnt/maemo/dev/mtd2ro c 90 5
+mknod /mnt/maemo/dev/mtd3 c 90 6
+mknod /mnt/maemo/dev/mtd3ro c 90 7
+mknod /mnt/maemo/dev/mtd4 c 90 8
+mknod /mnt/maemo/dev/mtd4ro c 90 9
+mknod /mnt/maemo/dev/mtd5 c 90 10
+mknod /mnt/maemo/dev/mtd5ro c 90 11
+mknod /mnt/maemo/dev/null c 1 3
+mknod /mnt/maemo/dev/port c 1 4
+mknod /mnt/maemo/dev/random c 1 8
+mknod /mnt/maemo/dev/tty c 5 0
+mknod /mnt/maemo/dev/ttyS0 c 4 64
+mknod /mnt/maemo/dev/ttyS1 c 4 65
+mknod /mnt/maemo/dev/ttyS2 c 4 66
+mknod /mnt/maemo/dev/tty0 c 4 0
+mknod /mnt/maemo/dev/urandom c 1 9
+mknod /mnt/maemo/dev/zero c 1 5
+
+mknod /mnt/maemo/dev/loop0 b 7 0
+mknod /mnt/maemo/dev/loop1 b 7 1
+mknod /mnt/maemo/dev/loop2 b 7 2
+mknod /mnt/maemo/dev/loop3 b 7 3
+mknod /mnt/maemo/dev/loop4 b 7 4
+mknod /mnt/maemo/dev/loop5 b 7 5
+mknod /mnt/maemo/dev/loop6 b 7 6
+mknod /mnt/maemo/dev/loop7 b 7 7
+mknod /mnt/maemo/dev/ram0 b 1 0
+mknod /mnt/maemo/dev/ram1 b 1 1
+mknod /mnt/maemo/dev/ram10 b 1 10
+mknod /mnt/maemo/dev/ram11 b 1 11
+mknod /mnt/maemo/dev/ram12 b 1 12
+mknod /mnt/maemo/dev/ram13 b 1 13
+mknod /mnt/maemo/dev/ram14 b 1 14
+mknod /mnt/maemo/dev/ram15 b 1 15
+mknod /mnt/maemo/dev/ram16 b 1 16
+mknod /mnt/maemo/dev/ram2 b 1 2
+mknod /mnt/maemo/dev/ram3 b 1 3
+mknod /mnt/maemo/dev/ram4 b 1 4
+mknod /mnt/maemo/dev/ram5 b 1 5
+mknod /mnt/maemo/dev/ram6 b 1 6
+mknod /mnt/maemo/dev/ram7 b 1 7
+mknod /mnt/maemo/dev/ram8 b 1 8
+mknod /mnt/maemo/dev/ram9 b 1 9
+
+ln -s /proc/kcore /mnt/maemo/dev/core
+ln -s ram1 /mnt/maemo/dev/ram
+
+mkdir /mnt/maemo/dev/pts
+chmod 755 /mnt/maemo/dev/pts
+
+chmod 600 /mnt/maemo/dev/console
+chmod 660 /mnt/maemo/dev/fb0
+chmod 660 /mnt/maemo/dev/fb1
+chmod 660 /mnt/maemo/dev/fb2
+chmod 666 /mnt/maemo/dev/full
+chmod 640 /mnt/maemo/dev/kmem
+chmod 660 /mnt/maemo/dev/loop0
+chmod 660 /mnt/maemo/dev/loop1
+chmod 660 /mnt/maemo/dev/loop2
+chmod 660 /mnt/maemo/dev/loop3
+chmod 660 /mnt/maemo/dev/loop4
+chmod 660 /mnt/maemo/dev/loop5
+chmod 660 /mnt/maemo/dev/loop6
+chmod 660 /mnt/maemo/dev/loop7
+chmod 640 /mnt/maemo/dev/mem
+chmod 600 /mnt/maemo/dev/mtd0
+chmod 600 /mnt/maemo/dev/mtd0ro
+chmod 600 /mnt/maemo/dev/mtd1
+chmod 600 /mnt/maemo/dev/mtd1ro
+chmod 600 /mnt/maemo/dev/mtd2
+chmod 600 /mnt/maemo/dev/mtd2ro
+chmod 600 /mnt/maemo/dev/mtd3
+chmod 600 /mnt/maemo/dev/mtd3ro
+chmod 600 /mnt/maemo/dev/mtd4
+chmod 600 /mnt/maemo/dev/mtd4ro
+chmod 600 /mnt/maemo/dev/mtd5
+chmod 600 /mnt/maemo/dev/mtd5ro
+chmod 666 /mnt/maemo/dev/null
+chmod 640 /mnt/maemo/dev/port
+chmod 660 /mnt/maemo/dev/ram0
+chmod 660 /mnt/maemo/dev/ram1
+chmod 660 /mnt/maemo/dev/ram10
+chmod 660 /mnt/maemo/dev/ram11
+chmod 660 /mnt/maemo/dev/ram12
+chmod 660 /mnt/maemo/dev/ram13
+chmod 660 /mnt/maemo/dev/ram14
+chmod 660 /mnt/maemo/dev/ram15
+chmod 660 /mnt/maemo/dev/ram16
+chmod 660 /mnt/maemo/dev/ram2
+chmod 660 /mnt/maemo/dev/ram3
+chmod 660 /mnt/maemo/dev/ram4
+chmod 660 /mnt/maemo/dev/ram5
+chmod 660 /mnt/maemo/dev/ram6
+chmod 660 /mnt/maemo/dev/ram7
+chmod 660 /mnt/maemo/dev/ram8
+chmod 660 /mnt/maemo/dev/ram9
+chmod 666 /mnt/maemo/dev/random
+chmod 666 /mnt/maemo/dev/tty
+chmod 660 /mnt/maemo/dev/ttyS0
+chmod 660 /mnt/maemo/dev/ttyS1
+chmod 660 /mnt/maemo/dev/ttyS2
+chmod 600 /mnt/maemo/dev/tty0
+chmod 444 /mnt/maemo/dev/urandom
+chmod 666 /mnt/maemo/dev/zero
+
+chown root:tty /mnt/maemo/dev/console
+chown root:video /mnt/maemo/dev/fb0
+chown root:video /mnt/maemo/dev/fb1
+chown root:video /mnt/maemo/dev/fb2
+chown root:root /mnt/maemo/dev/full
+chown root:kmem /mnt/maemo/dev/kmem
+chown root:disk /mnt/maemo/dev/loop0
+chown root:disk /mnt/maemo/dev/loop1
+chown root:disk /mnt/maemo/dev/loop2
+chown root:disk /mnt/maemo/dev/loop3
+chown root:disk /mnt/maemo/dev/loop4
+chown root:disk /mnt/maemo/dev/loop5
+chown root:disk /mnt/maemo/dev/loop6
+chown root:disk /mnt/maemo/dev/loop7
+chown root:kmem /mnt/maemo/dev/mem
+chown root:root /mnt/maemo/dev/mtd0
+chown root:root /mnt/maemo/dev/mtd0ro
+chown root:root /mnt/maemo/dev/mtd1
+chown root:root /mnt/maemo/dev/mtd1ro
+chown root:root /mnt/maemo/dev/mtd2
+chown root:root /mnt/maemo/dev/mtd2ro
+chown root:root /mnt/maemo/dev/mtd3
+chown root:root /mnt/maemo/dev/mtd3ro
+chown root:root /mnt/maemo/dev/mtd4
+chown root:root /mnt/maemo/dev/mtd4ro
+chown root:root /mnt/maemo/dev/mtd5
+chown root:root /mnt/maemo/dev/mtd5ro
+chown root:root /mnt/maemo/dev/null
+chown root:kmem /mnt/maemo/dev/port
+chown root:disk /mnt/maemo/dev/ram0
+chown root:disk /mnt/maemo/dev/ram1
+chown root:disk /mnt/maemo/dev/ram10
+chown root:disk /mnt/maemo/dev/ram11
+chown root:disk /mnt/maemo/dev/ram12
+chown root:disk /mnt/maemo/dev/ram13
+chown root:disk /mnt/maemo/dev/ram14
+chown root:disk /mnt/maemo/dev/ram15
+chown root:disk /mnt/maemo/dev/ram16
+chown root:disk /mnt/maemo/dev/ram2
+chown root:disk /mnt/maemo/dev/ram3
+chown root:disk /mnt/maemo/dev/ram4
+chown root:disk /mnt/maemo/dev/ram5
+chown root:disk /mnt/maemo/dev/ram6
+chown root:disk /mnt/maemo/dev/ram7
+chown root:disk /mnt/maemo/dev/ram8
+chown root:disk /mnt/maemo/dev/ram9
+chown root:root /mnt/maemo/dev/random
+chown root:tty /mnt/maemo/dev/tty
+chown root:dialout /mnt/maemo/dev/ttyS0
+chown root:dialout /mnt/maemo/dev/ttyS1
+chown root:dialout /mnt/maemo/dev/ttyS2
+chown root:tty /mnt/maemo/dev/tty0
+chown root:root /mnt/maemo/dev/urandom
+chown root:root /mnt/maemo/dev/zero
\ No newline at end of file
diff --git a/rescueOS/mass-storage-disable.sh b/rescueOS/mass-storage-disable.sh
new file mode 100755
index 0000000..be19ae8
--- /dev/null
+++ b/rescueOS/mass-storage-disable.sh
@@ -0,0 +1,2 @@
+#!/bin/sh
+rmmod g_file_storage
diff --git a/rescueOS/mass-storage-enable.sh b/rescueOS/mass-storage-enable.sh
new file mode 100755
index 0000000..8ed12aa
--- /dev/null
+++ b/rescueOS/mass-storage-enable.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+rmmod g_nokia 
+#stuff changes when sd card is inserted
+if [ -e /sys/block/mmcblk0 ] && [ -e /sys/block/mmcblk1 ] ; then 
+	modprobe g_file_storage file=/dev/mmcblk1p2,/dev/mmcblk1p1 stall=0 removable=1
+else
+	modprobe g_file_storage file=/dev/mmcblk0p2,/dev/mmcblk0p1 stall=0 removable=1
+fi
+
+
diff --git a/rescueOS/mount-maemo-root.sh b/rescueOS/mount-maemo-root.sh
new file mode 100755
index 0000000..2c7ab03
--- /dev/null
+++ b/rescueOS/mount-maemo-root.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+[ -d /mnt/maemo ] || mkdir /mnt/maemo/
+if [ -e /run/maemo-root-mounted ] ; then
+echo "A system script already mounted the rootfs of maemo to /mnt/maemo" ;
+exit ; 
+fi 
+ubiattach /dev/ubi_ctrl -m 5
+mount -t ubifs -o rw,bulk_read,no_chk_data_crc ubi0:rootfs /mnt/maemo && touch /run/maemo-root-mounted
diff --git a/rescueOS/nokia-n900.kmap b/rescueOS/nokia-n900.kmap
new file mode 100644
index 0000000..96e845e
Binary files /dev/null and b/rescueOS/nokia-n900.kmap differ
diff --git a/rescueOS/rcS b/rescueOS/rcS
new file mode 120000
index 0000000..50d438c
--- /dev/null
+++ b/rescueOS/rcS
@@ -0,0 +1 @@
+/etc/init.d/rcS
\ No newline at end of file
diff --git a/rescueOS/setup-wpa-wifi.sh b/rescueOS/setup-wpa-wifi.sh
new file mode 100755
index 0000000..2661cb2
--- /dev/null
+++ b/rescueOS/setup-wpa-wifi.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+ermsg()
+{
+echo $1
+exit
+}
+ls /lib/firmware/ | grep wl1251 > /dev/null || ermsg "Firmware not found. Copy  wl1251-fw.bin, wl1251-nvs.bin from maemo.".
+[ -e /run/wlan.conf ] ||  ermsg "Yeah, please run wpa_passphrase [essid] [password ] > /run/wlan.conf first."
+modprobe wl1251_spi
+#Works for my router, probably for yours too, if not, then not :-)
+
+sleep 1;
+wpa_supplicant -Dwext -iwlan0 -c/run/wlan.conf &
+
diff --git a/rescueOS/shutdown-cleanup b/rescueOS/shutdown-cleanup
new file mode 100644
index 0000000..5cff52a
--- /dev/null
+++ b/rescueOS/shutdown-cleanup
@@ -0,0 +1,35 @@
+umount_maemo()
+{
+sync
+umount /mnt/maemo
+ubidetach -m 5
+}
+cd /
+
+
+echo "Sending all processes the TERM signal..."
+kill -15 -1
+umount_maemo
+
+sleep 1
+echo "Sending all processes the KILL signal..."
+kill -9 -1
+
+umount_maemo
+
+
+
+echo "Unmounting  filesystems..."
+umount -a -r 2> /dev/null  
+
+
+sync
+
+#reset timer.
+sleep 3 
+i2cset -y -m 0x80 2 0x6b 0x04 0x80
+sleep 1
+echo 
+echo "RescueOS says good bye - have a good day."
+sleep 3
+poweroff -f
diff --git a/rescueOS/umount-maemo-root.sh b/rescueOS/umount-maemo-root.sh
new file mode 100755
index 0000000..297d059
--- /dev/null
+++ b/rescueOS/umount-maemo-root.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+ermsg()
+{
+echo "Couldn't unmount. Most likely your fault. Are you in /mnt/maemo?";
+exit;
+}
+
+sync
+umount /mnt/maemo || ermsg 
+ubidetach -m 5
+rm /run/maemo-root-mounted
diff --git a/rescueOS/usbnetworking-disable.sh b/rescueOS/usbnetworking-disable.sh
new file mode 100755
index 0000000..96ebac3
--- /dev/null
+++ b/rescueOS/usbnetworking-disable.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+#Yeah...
+rmmod g_nokia
diff --git a/rescueOS/usbnetworking-enable.sh b/rescueOS/usbnetworking-enable.sh
new file mode 100755
index 0000000..85c2396
--- /dev/null
+++ b/rescueOS/usbnetworking-enable.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+sh /rescueOS/mass-storage-disable.sh 
+modprobe g_nokia
+ifconfig usb0 down
+ifconfig usb0 192.168.2.15 up
+ifconfig usb0 netmask 255.255.255.0
+#route add default gw 192.168.178.14  
+route add 192.168.2.14 usb0