go.mod

@@ -3,7 +3,6 @@ module hs9001
 go 1.16
 
 require (
-	github.com/mattn/go-runewidth v0.0.13
 	github.com/tj/go-naturaldate v1.3.0
 	modernc.org/sqlite v1.10.0
 )

go.sum

@@ -8,16 +8,12 @@ github.com/kballard/go-shellquote v0.0.0-20180428030007-95032a82bc51 h1:Z9n2FFNU
 github.com/kballard/go-shellquote v0.0.0-20180428030007-95032a82bc51/go.mod h1:CzGEWj7cYgsdH8dAjBGEr58BoE7ScuLd+fwFZ44+/x8=
 github.com/mattn/go-isatty v0.0.12 h1:wuysRhFDzyxgEmMf5xjvJ2M9dZoWAXNNr5LSBS7uHXY=
 github.com/mattn/go-isatty v0.0.12/go.mod h1:cbi8OIDigv2wuxKPP5vlRcQ1OAZbq2CE4Kysco4FUpU=
-github.com/mattn/go-runewidth v0.0.13 h1:lTGmDsbAYt5DmK6OnoV7EuIF1wEIFAcxld6ypU4OSgU=
-github.com/mattn/go-runewidth v0.0.13/go.mod h1:Jdepj2loyihRzMpdS35Xk/zdY8IAYHsh153qUoGf23w=
 github.com/mattn/go-sqlite3 v1.14.6 h1:dNPt6NO46WmLVt2DLNpwczCmdV5boIZ6g/tlDrlRUbg=
 github.com/mattn/go-sqlite3 v1.14.6/go.mod h1:NyWgC/yNuGj7Q9rpYnZvas74GogHl5/Z4A/KQRfk6bU=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
 github.com/remyoudompheng/bigfft v0.0.0-20200410134404-eec4a21b6bb0 h1:OdAsTTz6OkFY5QxjkYwrChwuRruF69c169dPK26NUlk=
 github.com/remyoudompheng/bigfft v0.0.0-20200410134404-eec4a21b6bb0/go.mod h1:qqbHyh8v60DhA7CoWK5oRCqLrMHRGoxYCSS9EjAz6Eo=
-github.com/rivo/uniseg v0.2.0 h1:S1pD9weZBuJdFmowNwbpi7BJ8TNftyUImj/0WQi72jY=
-github.com/rivo/uniseg v0.2.0/go.mod h1:J6wj4VEh+S6ZtnVlnTBMWIodfgj8LQOQFoIToxlJtxc=
 github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
 github.com/stretchr/testify v1.4.0 h1:2E4SXV/wtOkTonXsotYi4li6zVWxYlZuYNCXe9XRJyk=
 github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4=
@@ -54,6 +50,7 @@ golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8T
 golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1 h1:go1bK/D/BFZV2I8cIQd1NKEZ+0owSTG1fDTci4IqFcE=
 golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405 h1:yhCVgyC4o1eVCa2tZl7eS0r+SDo693bJlVdllGtEeKM=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/yaml.v2 v2.2.2 h1:ZCJp+EgiOT7lHqUV2J862kp8Qj64Jo6az82+3Td9dZw=
 gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=

history.go

@@ -1,63 +0,0 @@
-package main
-
-import (
-	"database/sql"
-	"io"
-	"log"
-	"strings"
-)
-
-type history struct {
-	conn *sql.DB
-}
-
-func (h *history) GetHistoryByPrefix(prefix string) (ph []string) {
-	opts := searchopts{}
-	opts.order = "DESC"
-	cmdqry := prefix + "%"
-	opts.command = &cmdqry
-	results := search(h.conn, opts)
-	for e := results.Front(); e != nil; e = e.Next() {
-		entry, ok := e.Value.(*HistoryEntry)
-		if !ok {
-			log.Panic("Failed to retrieve entries")
-		}
-		ph = append(ph, entry.cmd)
-	}
-	return
-}
-func (h *history) GetHistoryByPattern(pattern string) (ph []string, pos []int) {
-	opts := searchopts{}
-	opts.order = "DESC"
-	cmdqry := "%" + pattern + "%"
-	opts.command = &cmdqry
-	results := search(h.conn, opts)
-	for e := results.Front(); e != nil; e = e.Next() {
-		entry, ok := e.Value.(*HistoryEntry)
-		if !ok {
-			log.Panic("Failed to retrieve entries")
-		}
-		ph = append(ph, entry.cmd)
-		pos = append(pos, strings.Index(strings.ToLower(entry.cmd), strings.ToLower(pattern)))
-	}
-	return
-}
-
-func (h *history) ReadHistory(r io.Reader) (num int, err error) {
-	panic("not implemented")
-}
-func (h *history) WriteHistory(w io.Writer) (num int, err error) {
-	panic("not implemented")
-}
-func (h *history) AppendHistory(item string) {
-	panic("not implemented")
-}
-func (h *history) ClearHistory() {
-	panic("not implemented")
-}
-func (h *history) RLock() {
-	//noop
-}
-func (h *history) RUnlock() {
-	//noop
-}

liner/LICENSE

@@ -1,20 +0,0 @@
-Copyright © 2012 Peter Harris
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice (including the next
-paragraph) shall be included in all copies or substantial portions of the
-Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-DEALINGS IN THE SOFTWARE.

liner/common.go

@@ -1,196 +0,0 @@
-/*
-Package liner implements a simple command line editor, inspired by linenoise
-(https://github.com/antirez/linenoise/). This package supports WIN32 in
-addition to the xterm codes supported by everything else.
-*/
-package liner
-
-import (
-	"bufio"
-	"container/ring"
-	"errors"
-	"fmt"
-	"io"
-)
-
-type commonState struct {
-	terminalSupported bool
-	outputRedirected  bool
-	inputRedirected   bool
-	historyProvider   HistoryProvider
-	completer         WordCompleter
-	columns           int
-	killRing          *ring.Ring
-	ctrlCAborts       bool
-	r                 *bufio.Reader
-	tabStyle          TabStyle
-	multiLineMode     bool
-	cursorRows        int
-	maxRows           int
-	shouldRestart     ShouldRestart
-	noBeep            bool
-	needRefresh       bool
-}
-
-type HistoryProvider interface {
-	ReadHistory(r io.Reader) (num int, err error)
-	WriteHistory(w io.Writer) (num int, err error)
-	AppendHistory(item string)
-	ClearHistory()
-	GetHistoryByPrefix(prefix string) (ph []string)
-	GetHistoryByPattern(pattern string) (ph []string, pos []int)
-	RLock()
-	RUnlock()
-}
-
-// TabStyle is used to select how tab completions are displayed.
-type TabStyle int
-
-// Two tab styles are currently available:
-//
-// TabCircular cycles through each completion item and displays it directly on
-// the prompt
-//
-// TabPrints prints the list of completion items to the screen after a second
-// tab key is pressed. This behaves similar to GNU readline and BASH (which
-// uses readline)
-const (
-	TabCircular TabStyle = iota
-	TabPrints
-)
-
-// ErrPromptAborted is returned from Prompt or PasswordPrompt when the user presses Ctrl-C
-// if SetCtrlCAborts(true) has been called on the State
-var ErrPromptAborted = errors.New("prompt aborted")
-
-// ErrNotTerminalOutput is returned from Prompt or PasswordPrompt if the
-// platform is normally supported, but stdout has been redirected
-var ErrNotTerminalOutput = errors.New("standard output is not a terminal")
-
-// ErrInvalidPrompt is returned from Prompt or PasswordPrompt if the
-// prompt contains any unprintable runes (including substrings that could
-// be colour codes on some platforms).
-var ErrInvalidPrompt = errors.New("invalid prompt")
-
-// ErrInternal is returned when liner experiences an error that it cannot
-// handle. For example, if the number of colums becomes zero during an
-// active call to Prompt
-var ErrInternal = errors.New("liner: internal error")
-
-// KillRingMax is the max number of elements to save on the killring.
-const KillRingMax = 60
-
-// HistoryLimit is the maximum number of entries saved in the scrollback history.
-const HistoryLimit = 1000
-
-func (s *State) ReadHistory(r io.Reader) (num int, err error) {
-	return s.historyProvider.ReadHistory(r)
-}
-func (s *State) WriteHistory(w io.Writer) (num int, err error) {
-	return s.historyProvider.WriteHistory(w)
-}
-func (s *State) AppendHistory(item string) {
-	s.historyProvider.AppendHistory(item)
-}
-func (s *State) ClearHistory() {
-	s.historyProvider.ClearHistory()
-}
-func (s *State) getHistoryByPrefix(prefix string) (ph []string) {
-	return s.historyProvider.GetHistoryByPrefix(prefix)
-}
-func (s *State) getHistoryByPattern(pattern string) (ph []string, pos []int) {
-	return s.historyProvider.GetHistoryByPattern(pattern)
-}
-
-// SetHistoryProvider allows you to set a custom provider
-// for reading, writing and searching history.
-// By implementing the HistoryProvider interface
-// and injecting your custom implementation here.
-func (s *State) SetHistoryProvider(f HistoryProvider) {
-	s.historyProvider = f
-}
-
-// Completer takes the currently edited line content at the left of the cursor
-// and returns a list of completion candidates.
-// If the line is "Hello, wo!!!" and the cursor is before the first '!', "Hello, wo" is passed
-// to the completer which may return {"Hello, world", "Hello, Word"} to have "Hello, world!!!".
-type Completer func(line string) []string
-
-// WordCompleter takes the currently edited line with the cursor position and
-// returns the completion candidates for the partial word to be completed.
-// If the line is "Hello, wo!!!" and the cursor is before the first '!', ("Hello, wo!!!", 9) is passed
-// to the completer which may returns ("Hello, ", {"world", "Word"}, "!!!") to have "Hello, world!!!".
-type WordCompleter func(line string, pos int) (head string, completions []string, tail string)
-
-// SetCompleter sets the completion function that Liner will call to
-// fetch completion candidates when the user presses tab.
-func (s *State) SetCompleter(f Completer) {
-	if f == nil {
-		s.completer = nil
-		return
-	}
-	s.completer = func(line string, pos int) (string, []string, string) {
-		return "", f(string([]rune(line)[:pos])), string([]rune(line)[pos:])
-	}
-}
-
-// SetWordCompleter sets the completion function that Liner will call to
-// fetch completion candidates when the user presses tab.
-func (s *State) SetWordCompleter(f WordCompleter) {
-	s.completer = f
-}
-
-// SetTabCompletionStyle sets the behvavior when the Tab key is pressed
-// for auto-completion.  TabCircular is the default behavior and cycles
-// through the list of candidates at the prompt.  TabPrints will print
-// the available completion candidates to the screen similar to BASH
-// and GNU Readline
-func (s *State) SetTabCompletionStyle(tabStyle TabStyle) {
-	s.tabStyle = tabStyle
-}
-
-// ModeApplier is the interface that wraps a representation of the terminal
-// mode. ApplyMode sets the terminal to this mode.
-type ModeApplier interface {
-	ApplyMode() error
-}
-
-// SetCtrlCAborts sets whether Prompt on a supported terminal will return an
-// ErrPromptAborted when Ctrl-C is pressed. The default is false (will not
-// return when Ctrl-C is pressed). Unsupported terminals typically raise SIGINT
-// (and Prompt does not return) regardless of the value passed to SetCtrlCAborts.
-func (s *State) SetCtrlCAborts(aborts bool) {
-	s.ctrlCAborts = aborts
-}
-
-// SetMultiLineMode sets whether line is auto-wrapped. The default is false (single line).
-func (s *State) SetMultiLineMode(mlmode bool) {
-	s.multiLineMode = mlmode
-}
-
-// ShouldRestart is passed the error generated by readNext and returns true if
-// the the read should be restarted or false if the error should be returned.
-type ShouldRestart func(err error) bool
-
-// SetShouldRestart sets the restart function that Liner will call to determine
-// whether to retry the call to, or return the error returned by, readNext.
-func (s *State) SetShouldRestart(f ShouldRestart) {
-	s.shouldRestart = f
-}
-
-// SetBeep sets whether liner should beep the terminal at various times (output
-// ASCII BEL, 0x07). Default is true (will beep).
-func (s *State) SetBeep(beep bool) {
-	s.noBeep = !beep
-}
-
-func (s *State) promptUnsupported(p string) (string, error) {
-	if !s.inputRedirected || !s.terminalSupported {
-		fmt.Print(p)
-	}
-	linebuf, _, err := s.r.ReadLine()
-	if err != nil {
-		return "", err
-	}
-	return string(linebuf), nil
-}

liner/input.go

@@ -1,391 +0,0 @@
-package liner
-
-import (
-	"bufio"
-	"errors"
-	"os"
-	"os/signal"
-	"strconv"
-	"strings"
-	"syscall"
-	"time"
-)
-
-type nexter struct {
-	r   rune
-	err error
-}
-
-// State represents an open terminal
-type State struct {
-	commonState
-	origMode    termios
-	defaultMode termios
-	next        <-chan nexter
-	winch       chan os.Signal
-	pending     []rune
-	useCHA      bool
-}
-
-// NewLiner initializes a new *State, and sets the terminal into raw mode. To
-// restore the terminal to its previous state, call State.Close().
-func NewLiner() *State {
-	var s State
-	s.r = bufio.NewReader(os.Stdin)
-
-	s.terminalSupported = TerminalSupported()
-	if m, err := TerminalMode(); err == nil {
-		s.origMode = *m.(*termios)
-	} else {
-		s.inputRedirected = true
-	}
-	if _, err := getMode(syscall.Stdout); err != 0 {
-		s.outputRedirected = true
-	}
-	if s.inputRedirected && s.outputRedirected {
-		s.terminalSupported = false
-	}
-	if s.terminalSupported && !s.inputRedirected && !s.outputRedirected {
-		mode := s.origMode
-		mode.Iflag &^= icrnl | inpck | istrip | ixon
-		mode.Cflag |= cs8
-		mode.Lflag &^= syscall.ECHO | icanon | iexten
-		mode.ApplyMode()
-
-		winch := make(chan os.Signal, 1)
-		signal.Notify(winch, syscall.SIGWINCH)
-		s.winch = winch
-
-		s.checkOutput()
-	}
-
-	if !s.outputRedirected {
-		s.outputRedirected = !s.getColumns()
-	}
-
-	return &s
-}
-
-var errTimedOut = errors.New("timeout")
-
-func (s *State) startPrompt() {
-	if s.terminalSupported {
-		if m, err := TerminalMode(); err == nil {
-			s.defaultMode = *m.(*termios)
-			mode := s.defaultMode
-			mode.Lflag &^= isig
-			mode.ApplyMode()
-		}
-	}
-	s.restartPrompt()
-}
-
-func (s *State) inputWaiting() bool {
-	return len(s.next) > 0
-}
-
-func (s *State) restartPrompt() {
-	next := make(chan nexter, 200)
-	go func() {
-		for {
-			var n nexter
-			n.r, _, n.err = s.r.ReadRune()
-			next <- n
-			// Shut down nexter loop when an end condition has been reached
-			if n.err != nil || n.r == '\n' || n.r == '\r' || n.r == ctrlC || n.r == ctrlD {
-				close(next)
-				return
-			}
-		}
-	}()
-	s.next = next
-}
-
-func (s *State) stopPrompt() {
-	if s.terminalSupported {
-		s.defaultMode.ApplyMode()
-	}
-}
-
-func (s *State) nextPending(timeout <-chan time.Time) (rune, error) {
-	select {
-	case thing, ok := <-s.next:
-		if !ok {
-			return 0, ErrInternal
-		}
-		if thing.err != nil {
-			return 0, thing.err
-		}
-		s.pending = append(s.pending, thing.r)
-		return thing.r, nil
-	case <-timeout:
-		rv := s.pending[0]
-		s.pending = s.pending[1:]
-		return rv, errTimedOut
-	}
-}
-
-func (s *State) readNext() (interface{}, error) {
-	if len(s.pending) > 0 {
-		rv := s.pending[0]
-		s.pending = s.pending[1:]
-		return rv, nil
-	}
-	var r rune
-	select {
-	case thing, ok := <-s.next:
-		if !ok {
-			return 0, ErrInternal
-		}
-		if thing.err != nil {
-			return nil, thing.err
-		}
-		r = thing.r
-	case <-s.winch:
-		s.getColumns()
-		return winch, nil
-	}
-	if r != esc {
-		return r, nil
-	}
-	s.pending = append(s.pending, r)
-
-	// Wait at most 50 ms for the rest of the escape sequence
-	// If nothing else arrives, it was an actual press of the esc key
-	timeout := time.After(50 * time.Millisecond)
-	flag, err := s.nextPending(timeout)
-	if err != nil {
-		if err == errTimedOut {
-			return flag, nil
-		}
-		return unknown, err
-	}
-
-	switch flag {
-	case '[':
-		code, err := s.nextPending(timeout)
-		if err != nil {
-			if err == errTimedOut {
-				return code, nil
-			}
-			return unknown, err
-		}
-		switch code {
-		case 'A':
-			s.pending = s.pending[:0] // escape code complete
-			return up, nil
-		case 'B':
-			s.pending = s.pending[:0] // escape code complete
-			return down, nil
-		case 'C':
-			s.pending = s.pending[:0] // escape code complete
-			return right, nil
-		case 'D':
-			s.pending = s.pending[:0] // escape code complete
-			return left, nil
-		case 'F':
-			s.pending = s.pending[:0] // escape code complete
-			return end, nil
-		case 'H':
-			s.pending = s.pending[:0] // escape code complete
-			return home, nil
-		case 'Z':
-			s.pending = s.pending[:0] // escape code complete
-			return shiftTab, nil
-		case '0', '1', '2', '3', '4', '5', '6', '7', '8', '9':
-			num := []rune{code}
-			for {
-				code, err := s.nextPending(timeout)
-				if err != nil {
-					if err == errTimedOut {
-						return code, nil
-					}
-					return nil, err
-				}
-				switch code {
-				case '0', '1', '2', '3', '4', '5', '6', '7', '8', '9':
-					num = append(num, code)
-				case ';':
-					// Modifier code to follow
-					// This only supports Ctrl-left and Ctrl-right for now
-					x, _ := strconv.ParseInt(string(num), 10, 32)
-					if x != 1 {
-						// Can't be left or right
-						rv := s.pending[0]
-						s.pending = s.pending[1:]
-						return rv, nil
-					}
-					num = num[:0]
-					for {
-						code, err = s.nextPending(timeout)
-						if err != nil {
-							if err == errTimedOut {
-								rv := s.pending[0]
-								s.pending = s.pending[1:]
-								return rv, nil
-							}
-							return nil, err
-						}
-						switch code {
-						case '0', '1', '2', '3', '4', '5', '6', '7', '8', '9':
-							num = append(num, code)
-						case 'C', 'D':
-							// right, left
-							mod, _ := strconv.ParseInt(string(num), 10, 32)
-							if mod != 5 {
-								// Not bare Ctrl
-								rv := s.pending[0]
-								s.pending = s.pending[1:]
-								return rv, nil
-							}
-							s.pending = s.pending[:0] // escape code complete
-							if code == 'C' {
-								return wordRight, nil
-							}
-							return wordLeft, nil
-						default:
-							// Not left or right
-							rv := s.pending[0]
-							s.pending = s.pending[1:]
-							return rv, nil
-						}
-					}
-				case '~':
-					s.pending = s.pending[:0] // escape code complete
-					x, _ := strconv.ParseInt(string(num), 10, 32)
-					switch x {
-					case 2:
-						return insert, nil
-					case 3:
-						return del, nil
-					case 5:
-						return pageUp, nil
-					case 6:
-						return pageDown, nil
-					case 1, 7:
-						return home, nil
-					case 4, 8:
-						return end, nil
-					case 15:
-						return f5, nil
-					case 17:
-						return f6, nil
-					case 18:
-						return f7, nil
-					case 19:
-						return f8, nil
-					case 20:
-						return f9, nil
-					case 21:
-						return f10, nil
-					case 23:
-						return f11, nil
-					case 24:
-						return f12, nil
-					default:
-						return unknown, nil
-					}
-				default:
-					// unrecognized escape code
-					rv := s.pending[0]
-					s.pending = s.pending[1:]
-					return rv, nil
-				}
-			}
-		}
-
-	case 'O':
-		code, err := s.nextPending(timeout)
-		if err != nil {
-			if err == errTimedOut {
-				return code, nil
-			}
-			return nil, err
-		}
-		s.pending = s.pending[:0] // escape code complete
-		switch code {
-		case 'c':
-			return wordRight, nil
-		case 'd':
-			return wordLeft, nil
-		case 'H':
-			return home, nil
-		case 'F':
-			return end, nil
-		case 'P':
-			return f1, nil
-		case 'Q':
-			return f2, nil
-		case 'R':
-			return f3, nil
-		case 'S':
-			return f4, nil
-		default:
-			return unknown, nil
-		}
-	case 'b':
-		s.pending = s.pending[:0] // escape code complete
-		return altB, nil
-	case 'd':
-		s.pending = s.pending[:0] // escape code complete
-		return altD, nil
-	case bs:
-		s.pending = s.pending[:0] // escape code complete
-		return altBs, nil
-	case 'f':
-		s.pending = s.pending[:0] // escape code complete
-		return altF, nil
-	case 'y':
-		s.pending = s.pending[:0] // escape code complete
-		return altY, nil
-	default:
-		rv := s.pending[0]
-		s.pending = s.pending[1:]
-		return rv, nil
-	}
-
-	// not reached
-	return r, nil
-}
-
-// Close returns the terminal to its previous mode
-func (s *State) Close() error {
-	signal.Stop(s.winch)
-	if !s.inputRedirected {
-		s.origMode.ApplyMode()
-	}
-	return nil
-}
-
-// TerminalSupported returns true if the current terminal supports
-// line editing features, and false if liner will use the 'dumb'
-// fallback for input.
-// Note that TerminalSupported does not check all factors that may
-// cause liner to not fully support the terminal (such as stdin redirection)
-func TerminalSupported() bool {
-	bad := map[string]bool{"": true, "dumb": true, "cons25": true}
-	return !bad[strings.ToLower(os.Getenv("TERM"))]
-}
-
-const (
-	getTermios = syscall.TCGETS
-	setTermios = syscall.TCSETS
-)
-
-const (
-	icrnl  = syscall.ICRNL
-	inpck  = syscall.INPCK
-	istrip = syscall.ISTRIP
-	ixon   = syscall.IXON
-	opost  = syscall.OPOST
-	cs8    = syscall.CS8
-	isig   = syscall.ISIG
-	icanon = syscall.ICANON
-	iexten = syscall.IEXTEN
-)
-
-type termios struct {
-	syscall.Termios
-}
-
-const cursorColumn = false

liner/output.go

@@ -1,74 +0,0 @@
-package liner
-
-import (
-	"fmt"
-	"os"
-	"strings"
-	"syscall"
-	"unsafe"
-)
-
-func (s *State) cursorPos(x int) {
-	if s.useCHA {
-		// 'G' is "Cursor Character Absolute (CHA)"
-		fmt.Printf("\x1b[%dG", x+1)
-	} else {
-		// 'C' is "Cursor Forward (CUF)"
-		fmt.Print("\r")
-		if x > 0 {
-			fmt.Printf("\x1b[%dC", x)
-		}
-	}
-}
-
-func (s *State) eraseLine() {
-	fmt.Print("\x1b[0K")
-}
-
-func (s *State) eraseScreen() {
-	fmt.Print("\x1b[H\x1b[2J")
-}
-
-func (s *State) moveUp(lines int) {
-	fmt.Printf("\x1b[%dA", lines)
-}
-
-func (s *State) moveDown(lines int) {
-	fmt.Printf("\x1b[%dB", lines)
-}
-
-func (s *State) emitNewLine() {
-	fmt.Print("\n")
-}
-
-type winSize struct {
-	row, col       uint16
-	xpixel, ypixel uint16
-}
-
-func (s *State) getColumns() bool {
-	var ws winSize
-	ok, _, _ := syscall.Syscall(syscall.SYS_IOCTL, uintptr(syscall.Stdout),
-		syscall.TIOCGWINSZ, uintptr(unsafe.Pointer(&ws)))
-	if int(ok) < 0 {
-		return false
-	}
-	s.columns = int(ws.col)
-	return true
-}
-
-func (s *State) checkOutput() {
-	// xterm is known to support CHA
-	if strings.Contains(strings.ToLower(os.Getenv("TERM")), "xterm") {
-		s.useCHA = true
-		return
-	}
-
-	// The test for functional ANSI CHA is unreliable (eg the Windows
-	// telnet command does not support reading the cursor position with
-	// an ANSI DSR request, despite setting TERM=ansi)
-
-	// Assume CHA isn't supported (which should be safe, although it
-	// does result in occasional visible cursor jitter)
-	s.useCHA = false
-}

liner/unixmode.go

@@ -1,35 +0,0 @@
-package liner
-
-import (
-	"syscall"
-	"unsafe"
-)
-
-func (mode *termios) ApplyMode() error {
-	_, _, errno := syscall.Syscall(syscall.SYS_IOCTL, uintptr(syscall.Stdin), setTermios, uintptr(unsafe.Pointer(mode)))
-
-	if errno != 0 {
-		return errno
-	}
-	return nil
-}
-
-// TerminalMode returns the current terminal input mode as an InputModeSetter.
-//
-// This function is provided for convenience, and should
-// not be necessary for most users of liner.
-func TerminalMode() (ModeApplier, error) {
-	mode, errno := getMode(syscall.Stdin)
-
-	if errno != 0 {
-		return nil, errno
-	}
-	return mode, nil
-}
-
-func getMode(handle int) (*termios, syscall.Errno) {
-	var mode termios
-	_, _, errno := syscall.Syscall(syscall.SYS_IOCTL, uintptr(handle), getTermios, uintptr(unsafe.Pointer(&mode)))
-
-	return &mode, errno
-}

liner/width.go

@@ -1,90 +0,0 @@
-package liner
-
-import (
-	"unicode"
-
-	"github.com/mattn/go-runewidth"
-)
-
-// These character classes are mostly zero width (when combined).
-// A few might not be, depending on the user's font. Fixing this
-// is non-trivial, given that some terminals don't support
-// ANSI DSR/CPR
-var zeroWidth = []*unicode.RangeTable{
-	unicode.Mn,
-	unicode.Me,
-	unicode.Cc,
-	unicode.Cf,
-}
-
-// countGlyphs considers zero-width characters to be zero glyphs wide,
-// and members of Chinese, Japanese, and Korean scripts to be 2 glyphs wide.
-func countGlyphs(s []rune) int {
-	n := 0
-	for _, r := range s {
-		// speed up the common case
-		if r < 127 {
-			n++
-			continue
-		}
-
-		n += runewidth.RuneWidth(r)
-	}
-	return n
-}
-
-func countMultiLineGlyphs(s []rune, columns int, start int) int {
-	n := start
-	for _, r := range s {
-		if r < 127 {
-			n++
-			continue
-		}
-		switch runewidth.RuneWidth(r) {
-		case 0:
-		case 1:
-			n++
-		case 2:
-			n += 2
-			// no room for a 2-glyphs-wide char in the ending
-			// so skip a column and display it at the beginning
-			if n%columns == 1 {
-				n++
-			}
-		}
-	}
-	return n
-}
-
-func getPrefixGlyphs(s []rune, num int) []rune {
-	p := 0
-	for n := 0; n < num && p < len(s); p++ {
-		// speed up the common case
-		if s[p] < 127 {
-			n++
-			continue
-		}
-		if !unicode.IsOneOf(zeroWidth, s[p]) {
-			n++
-		}
-	}
-	for p < len(s) && unicode.IsOneOf(zeroWidth, s[p]) {
-		p++
-	}
-	return s[:p]
-}
-
-func getSuffixGlyphs(s []rune, num int) []rune {
-	p := len(s)
-	for n := 0; n < num && p > 0; p-- {
-		// speed up the common case
-		if s[p-1] < 127 {
-			n++
-			continue
-		}
-		if !unicode.IsOneOf(zeroWidth, s[p-1]) {
-			n++
-		}
-	}
-	return s[p:]
-}

main.go

@@ -10,12 +10,9 @@ import (
 	"os"
 	"path/filepath"
 	"regexp"
-	"strconv"
 	"strings"
 	"time"
 
-	"hs9001/liner"
-
 	"github.com/tj/go-naturaldate"
 	_ "modernc.org/sqlite"
 )
@@ -151,47 +148,28 @@ func importFromStdin(conn *sql.DB) {
 	}
 }
 
-type searchopts struct {
+func search(conn *sql.DB, q string, workdir string, beginTime time.Time, endTime time.Time, retval int) list.List {
-	command *string
-	workdir *string
-	after   *time.Time
-	before  *time.Time
-	retval  *int
-	order   string
-}
-
-func search(conn *sql.DB, opts searchopts) list.List {
-	args := make([]interface{}, 0)
 	var sb strings.Builder
 	sb.WriteString("SELECT id, command, workdir, user, hostname, retval ")
 	sb.WriteString("FROM history ")
-	sb.WriteString("WHERE 1=1 ") //1=1 so we can append as many AND foo as we want, or none
+	sb.WriteString("WHERE timestamp BETWEEN datetime(?, 'unixepoch') ")
-
+	sb.WriteString("AND datetime(?, 'unixepoch') ")
-	if opts.command != nil {
+	sb.WriteString("AND command LIKE ? ")
-		sb.WriteString("AND command LIKE ? ")
+	sb.WriteString("AND workdir LIKE ? ")
-		args = append(args, opts.command)
+	if retval != -9001 {
-	}
-	if opts.workdir != nil {
-		sb.WriteString("AND workdir LIKE ? ")
-		args = append(args, opts.workdir)
-	}
-	if opts.after != nil {
-		sb.WriteString("AND timestamp > datetime(?, 'unixepoch') ")
-		args = append(args, opts.after.Unix())
-	}
-	if opts.before != nil {
-		sb.WriteString("AND timestamp < datetime(?, 'unixepoch') ")
-		args = append(args, opts.before.Unix())
-	}
-	if opts.retval != nil {
 		sb.WriteString("AND retval = ? ")
-		args = append(args, opts.retval)
 	}
-	sb.WriteString("ORDER BY timestamp ")
+	sb.WriteString("ORDER BY timestamp ASC ")
-	sb.WriteString("ASC ")
 
 	queryStmt := sb.String()
-
+	args := make([]interface{}, 0)
+	args = append(args, beginTime.Unix())
+	args = append(args, endTime.Unix())
+	args = append(args, q)
+	args = append(args, workdir)
+	if retval != -9001 {
+		args = append(args, retval)
+	}
 	rows, err := conn.Query(queryStmt, args...)
 	if err != nil {
 		log.Panic(err)
@@ -288,26 +266,10 @@ func main() {
 	migrateDatabase(conn, fetchDBVersion(conn))
 
 	switch cmd {
-	case "bash-ctrlr":
-		line := liner.NewLiner()
-		defer line.Close()
-		line.SetCtrlCAborts(true)
-		line.SetHistoryProvider(&history{conn: conn})
-		line.SetMultiLineMode(true)
-
-		rdlineline := os.Getenv("READLINE_LINE")
-		rdlinepos := os.Getenv("READLINE_POS")
-		rdlineposint, _ := strconv.Atoi(rdlinepos)
-
-		if name, err := line.PromptWithSuggestionReverse("", rdlineline, rdlineposint); err == nil {
-			fmt.Fprintf(os.Stderr, "%s\n", name)
-		}
-
 	case "bash-enable":
 		fmt.Printf(`
 			if [ -n "$PS1" ] ; then
 				PROMPT_COMMAND='hs9001 add -ret $? "$(history 1)"'
-				bind -x '"\C-r": " READLINE_LINE=$(hs9001 bash-ctrlr 3>&1 1>&2 2>&3) READLINE_POINT=0"'
 			fi
 		`)
 	case "bash-disable":
@@ -335,13 +297,13 @@ func main() {
 		fallthrough
 	case "delete":
 		var workDir string
-		var afterTime string
+		var beginTime string
-		var beforeTime string
+		var endTime string
 		var distinct bool = true
 		var retVal int
-		searchCmd.StringVar(&workDir, "cwd", "", "Search only within this workdir")
+		searchCmd.StringVar(&workDir, "cwd", "%", "Search only within this workdir")
-		searchCmd.StringVar(&afterTime, "after", "", "Start searching from this timeframe")
+		searchCmd.StringVar(&beginTime, "begin", "50 years ago", "Start searching from this timeframe")
-		searchCmd.StringVar(&beforeTime, "before", "", "End searching from this timeframe")
+		searchCmd.StringVar(&endTime, "end", "now", "End searching from this timeframe")
 		searchCmd.BoolVar(&distinct, "distinct", true, "Remove consecutive duplicate commands from output")
 		searchCmd.IntVar(&retVal, "ret", -9001, "Only query commands that returned with this exit code. -9001=all (default)")
 
@@ -349,39 +311,25 @@ func main() {
 
 		args := searchCmd.Args()
 
-		q := strings.Join(args, " ")
+		beginTimestamp, err := naturaldate.Parse(beginTime, time.Now())
-
+		if err != nil {
-		opts := searchopts{}
+			fmt.Fprintf(os.Stderr, "Failed to convert time string: %s\n", err.Error())
-		opts.order = "ASC"
-		if q != "" {
-			cmd := "%" + q + "%"
-			opts.command = &cmd
 		}
-		if workDir != "" {
+
-			wd, err := filepath.Abs(workDir)
+		endTimeStamp, err := naturaldate.Parse(endTime, time.Now())
+		if err != nil {
+			fmt.Fprintf(os.Stderr, "Failed to convert time string: %s\n", err.Error())
+		}
+
+		q := strings.Join(args, " ")
+		if workDir != "%" {
+			workDir, err = filepath.Abs(workDir)
 			if err != nil {
 				fmt.Fprintf(os.Stderr, "Failed parse working directory path: %s\n", err.Error())
 			}
-			opts.workdir = &wd
 		}
-		if afterTime != "" {
+
-			afterTimestamp, err := naturaldate.Parse(afterTime, time.Now())
+		results := search(conn, "%"+q+"%", workDir, beginTimestamp, endTimeStamp, retVal)
-			if err != nil {
-				fmt.Fprintf(os.Stderr, "Failed to convert time string: %s\n", err.Error())
-			}
-			opts.after = &afterTimestamp
-		}
-		if beforeTime != "" {
-			beforeTimestamp, err := naturaldate.Parse(beforeTime, time.Now())
-			if err != nil {
-				fmt.Fprintf(os.Stderr, "Failed to convert time string: %s\n", err.Error())
-			}
-			opts.before = &beforeTimestamp
-		}
-		if retVal != -9001 {
-			opts.retval = &retVal
-		}
-		results := search(conn, opts)
 
 		previousCmd := ""
 		for e := results.Front(); e != nil; e = e.Next() {