When cgit learned to setup environment variables for certain repo
settings before invoking a filter process, the setup occurred inside
cgit_open_filter().
This patch moves the setup out of cgit_open_filter() and into
prepare_repo_cmd() to prepare for additional uses of these variables.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
In d0cb841 (Avoid trailing slash in virtual-root), virtual-root was set
from script-name using trim_end(). However, if script-name was the
empty string (""), which happens when cgit is used to serve the root
path on a domain (/), trim_end() returns NULL and cgit acts like
virtual-root is not available. Now, set virtual-root to "" in this
case, which fixes this bug.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Currently the number of extra arguments is linked hard to the type of
the filter. This is also logical since it would be confusing to have
a different number of arguments for the same type of filter depending
on the context under which the filter is run (unless ofcourse one the
parameters would make the context clear, which is currently not the
case).
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When setting virtual-root from cgitrc, care is taken to avoid trailing
slashes. But when no virtual-root setting is specified, SCRIPT_FILE
from the web server is used without similar checks. This patch fixes the
inconsistency, which could lead to double-slashes in generated links.
Noticed-by: Wouter Van Hemel <wouter@duodecim.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
We were returning 200 before. Even 404 is questionable in all cases, but
200 was totally wrong. Also match the case of all of the "Not found"
status messsages.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
If advertising other URLs to your users, you may not want to make this
available through cgit (e.g. if you have the smart HTTP transport set up
elsewhere). Allow disabling the three magic commands that simulate the
git server, but default it to enabled.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Allow for per repo logo and logo-link; Use global logo and logo-link per
default.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Paths that start with a period ('.') are considered hidden in the Unix world.
scan_path() should arguably not recurse into these directories by default.
This patch makes it so, and introduces the "scan-hidden-path" config variable
for overriding the new default and revert to the old behaviour (scanning _all_
directories, including hidden .directories).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
Teach CGit to print an ASCII art commit graph to the left of the commit
message, similar to 'git log --graph'. The graph adds extra lines (table
rows) to the log when needed to add/remove/shuffle edges in the graph.
When 'showmsg' is enabled, the graph is automatically padded to account
for the extra lines added by the commit message/notes.
This feature is controlled by a new config variable: "enable-commit-graph"
(disabled by default), and individual repos can control it by setting
"repo.enable-commit-graph".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option is used to specify a filename which needs to be present in
the repositories found during `scan-path` processing. By setting this
option to 'git-daemon-export-ok', only repositories explicitly marked
for git daemon export will be included in the cgit configuration.
Signed-off-by: Felix Hanley <felix@seconddrawer.com.au>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
There were many places where the arguments to a printf-like function did
not match the format string. Mostly, these were a missing 'l' flag, but
there were three exceptions:
- In ui-stats.c, a size_t argument must be printed. C99 has the "%zu"
flag for this purpose, but not all compilers support this. Therefore,
we mimic what git does - use a NO_C99_FORMAT Makefile variable.
- In ui-stats.c, cgit_print_error() was called with a pointer instead of
a character.
- In ui-log.c, the "columns" argument was never used.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
When this option is enabled (which it is by default), cgit will lookup
the 'gitweb.owner' setting in each git config file found when processing
the 'scan-path' option.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When this option is enabled, the '.git' suffix of repository directories
found while processing the 'scan-path' option will be removed.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option specifies the location of a projectlist file as used by
gitweb - when 'scan-tree' is later specified, only the projects listed in
the projectlist file will be added.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The new ctx.qry.ignorews variable is passed via cgit_diff_files() and
cgit_diff_tree() to Git's diff machinery. This is equivalent to passing
--ignore-all-space to 'git diff'.
Signed-off-by: Johan Herland <johan@herland.net>
The new ctx.qry.context variable is picked up by cgit_print_diff(), and
passed via cgit_diff_files() to Git's diff machinery.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
For many commands/pages (e.g. 'tree', 'diff', 'plain', etc.), the
ctx.qry.path argument is interpreted as a path within the "virtual" project
directory structure. However, for some other commands (notably 'refs', and
the clone-related commands) ctx.qry.path is used in a different context (as
a more or less "real" path within the '.git' directory).
This patch differentiates between these two usages of ctx.qry.path, by
introducing a new variable - ctx.qry.vpath - which is equal to ctx.qry.path
in the former case, and NULL in the latter.
This will become useful in future patches when we want various pages and the
links between them to preserve existing in-project paths.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This allows one to specify the items in the RSS feeds
Signed-off-by: Aaron Griffin <agriffin@datalogics.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This patch teaches cgit to expand environment variables in certain
cgitrc option values (cache_root, scan-path, include) plus when
finding the location of cgitrc itself.
One use case for this feature is virtual hosting - e.g. by setting
$CGIT_CONFIG='/etc/cgitrc/$HTTP_HOST' in httpd.conf, all virtual
hosts automatically gets their own cgitrc.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Sometimes it is not feasible to generate the HTML pretty-print for large
files, especially if a source-filter is involved or binary data is to be
displayed. The "max-blob-size" config var allows to disable HTML output
for blobs bigger than X KBytes. Plain downloads are not affected.
Signed-off-by: Georg Lukas <georg@op-co.de>
Makes it easier to rewrite :)
lighttpd-sandbox: rewrite "/cgit.cgi?url=%{enc:request.path}&%{request.query}";
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
A new config option side-by-side-diffs added, defaulting to 0,
meaning unidiff. Also a query option (ss) is used toggle this.
In the commit page you can switch between the two diff formats by
clicking on the link on the "commit"-row, to the right of (patch).
In the diff page you can switch by using the link at the start
of the page.
All commit-links and diff-links will remember the choice.
Signed-off-by: Ragnar Ouchterlony <ragnar@lysator.liu.se>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The repo-specific 'snapshots' option is bitwise AND'ed with the global
'snapshots' option during parsing, and since the global cgitrc hasn't
been parsed when --scan-path is processed the global 'snapshots' will
always be 0 (i.e. no repo-specific 'snapshots' setting will have any
effect).
This patch fixes the issue by setting the global 'snapshots' mask to
0xFF (hence relying on later parsing of the generated cgitrc repolist
to do the right thing).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Since repo.desc might have been populated by reading the 'description'
file in GIT_DIR, it may contain newlines. And by printing the literal
value, we may then generate an invalid cgitrc include-file.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Note: print_repo() still ignores repo.max-stats and repo.snapshots,
which both requires additional work since these settings are represented
internally as an enum and a bitmap.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option must be enabled if repo-specific cgitrc files should be
allowed to override any of the 'filter' options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When recursively scanning a directory tree looking for git repositories,
cgit will now parse cgitrc files found within such repositories.
The repo-specific config files can include any repo-specific options
except 'repo.url' and 'repo.path'. Also, in such config files the 'repo.'
prefix can not be used, i.e. the valid options then becomes:
* name
* clone-url
* desc
* ower
* defbranch
* snapshots
* enable-log-filecount
* enable-log-linecount
* max-stats
* module-link
* section
* about-filter
* commit-filter
* source-filter
* readme
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The new function repo_config() is used to handle all 'simple' repo
options, for the following reasons:
* code readability
* parser performance
* upcoming support for repo-local cgitrc files during scanning
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The 'repo.' prefix should be reserved for repo-specific options, but
the option 'repo.group' must still be honored to stay backwards
compatible.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This makes the name of the cgitrc option more descriptive and at the
same time changes the default from "0" to "1" in an attempt to stay
backwards compatible - prior to the introduction of "source-filter"
and "linenumbers", cgit always generated linenumber links in the
tree view, but now this feature can be turned off (one might want to
do this if the source-filter performs line-wrapping etc).
While at it, the documentation is updated to match the surrounding
descriptions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When generating a hash for caching, ctx.qry.raw is used as key. And
since cgit_parse_url() zero-terminates it's argument (after the repo
path), ctx.qry.raw must xstrdup(ctx.qry.url).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The querystring_cb() function will be invoked with a NULL value when
the querystring contains a name not followed by a '='. Such a value
used to cause a segfault, which this patch fixes.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
cgit_print_http_headers() used to do nothing if 'embedded' was
specified in cgitrc, but that was wrong - we never want to skip the
headers when invoked as a CGI app. Sadly, there's no easy way to
detect if we're invoked as a CGI app or if we're invoked by another
CGI app, so for the latter case cgit needs to be invoked with either
--nohttp on the command line or NO_HTTP=1 in the environment.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
These options can be used to execute a filter command on each about-page,
both top-level and for each repository (repo.about-filter can be used
to override the current about-filter).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
If e.g. repo.commit-filter is specified as an empty string, this
is now properly handled as disabling the global commit-filter setting
for the current repository.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This new option specifies a filter which is executed on the commit
message, i.e. the commit message is written to the filters STDIN and
the filters STDOUT is included verbatim as the commit message.
This can be used to implement commit linking by creating a simple
shell script in e.g. /usr/bin/cgit-commit-filter.sh like this:
#/bin/sh
sed -re 's|\b([0-9a-fA-F]{6,40})\b|<a href="./?id=\1">\1</a>|g'
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This new option is used to specify an external command which will be
executed when displaying blob content in the tree view. Blob content
will be written to STDIN of the filter and STDOUT from the filter
will be included verbatim in the html output from cgit. The file name
of the blob will be passed as the only argument to the filter command.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The functions cgit_open_filter() and cgit_close_filter() can be used to
execute filters on the output stream from cgit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This patch makes it possible to register mappings from filename
extension to mime type in cgitrc and use this mapping when returning
blob content in `plain` view.
The reason for adding this mapping to cgitrc (as opposed to parsing
something like /etc/mime.types) is to allow quick lookup of a limited
number of filename extensions (/etc/mime-types on my machine currently
contains over 700 entries).
NB: A nice addition to this patch would be to parse /etc/mime.types
when `plain` view is requested for a file with an extension for which
there is no mapping registered in cgitrc.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option can be used to disable the standard cgit page header, which
might be useful in combination with the 'embedded' option.
Suggested-by: Mark Constable <markc@renta.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This patch adds an option to the configuration file, "head-include",
which works just like "header" or "footer", except the content is put
into the HTML's <head> tag.
When downloading a blob identified by its path, the client might want
to know if the blob has been modified since a previous download of the
same path. To this end, an ETag containing the blob SHA1 seems to be
ideal.
Todo: add support for HEAD requests...
Suggested-by: Owen Taylor <otaylor@redhat.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When activated, cgit will neither generate http headers nor any 'framing'
html elements (like <html> and <body>). Also, all page content is now
wrapped in a <div id='cgit'> element to make it easier to select the
correct cgit classes when embedded/themed.
Suggested-by: Matt Sealey <matt@genesi-usa.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
