* Remove whitespace at the end of lines.
* Replace space indentation by tabs.
* Add whitespace before/after several operators ("+", "-", "*", ...)
* Add whitespace to assignments ("foo = bar;").
* Fix whitespace in parameter lists ("foobar(foo, bar, 42)").
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
This is not really needed for personal sites where all repos belong to
the same person. Since it is pretty useful for shared sites however, it
should be configurable.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This makes it possible to use strict commit date ordering or strict
topological ordering by passing the corresponding flags to "git log".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Flag which, when set to "1", will sort the sections on the repository
listing by name. Set this flag to "0" if the order in the cgitrc file
should be preserved. Default value: "1".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
After some back and forth with Jamie and René, it looks like the git
config semantics are going to be like this:
- gitweb.category maps to the cgit repo config key "section"
- gitweb.description maps to the cgit repo config key "desc"
- gitweb.owner maps to the cgit repo config key "owner"
- cgit.* maps to all cgit repo config keys
This option can be enabled with "enable-git-config=1", and replaces
all previous "enable-gitweb-*" config keys.
The order of operations is as follows:
- git config settings are applied in the order that they exist in
the git config file
- if the owner is not set from git config, get the owner using the
usual getpwuid call
- if the description is not set from git config, look inside the
static $path/description file
- if section-from-path=1, override whatever previous settings were
inside of git config using the section-from-path logic
- parse $path/cgitrc for local repo.* settings, that override all
previous settings
This makes it possible to activate the enable_commit_graph,
enable_log_filecount, and enable_log_linecount for individual
repositories, even if the global setting is "0" (default).
The commit that introduced the broken behavior was e189344, and the
commit message of that makes it clear that this wasn't the intended
behavior.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add two options, one for doing the ordinary name sorts in a
case-insensitive manner, and another for choosing to sort repos in each
section by age instead of by name.
When side-by-side-diffs=1 was set in cgitrc, specyfing 'ss=0' in the query-
string would not switch to unified diffs. This patch fixes the issue by
introducing a separate variable to track the occurrence of "ss" in the
querystring.
For sites that do not want to configure mime types by hand but
still want the correct mime type for 'plain' blobs, configuring
a mime type file is made possible. This is handy since such a
file is normally already provided (at least on Linux systems).
Also, this reflects the gitweb option '$mimetypes_file'
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The resolve_ref() function handles reading of git- and filesystem
symbolic links (including proper whitespace trimming) and packed refs.
There's no point in reimplementing this function in cgit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
There's no need to invoke guess_defbranch() for each repo during
scan-path, since repo.defbranch is only used when repo content is
being displayed.
Also, some users prefer to register their projects manually in cgitrc
but they got no benefit from the new repo.defbranch handling.
This patch tries to rectify these issues by only invoking guess_defbranch()
when needed, regardless of how the repo was registered.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'Not a git repository' error message is not very helpful,
since it doesn't state the cause of the problem.
This patch uses errno to provide a hint of the underlying problem. It
would have been even better to give the exact cause (e.g. for ENOENT it
would be nice to know which file/directory is missing), but that would
require reimplementing setup_git_directory_gently() which seems a bit
overkill.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The old default value was an abomination which never should have been
allowed to see the light of day.
This patch removes the default, which is a backwards incompatible change
with low probability of causing anyone any real trouble (a repo with
submodules, displayed by cgit using the default value of `module-link`,
is very unlikely to actually generate working links).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'repo.module-link' option is sufficient when all gitlinks
in a repository can be converted to commit links in a uniform way, but
not when different submodules/paths needs different settings.
This patch adds support for 'repo.module-link.<path>', which will be
used for linking to submodules at paths matching one such entry.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'clone-prefix' setting has some known issues:
* All repos get the same 'clone-prefix' value since the setting is not
adopted during repo registration (in cgitrc, or during scan-path traversal),
but only when the setting is used.
* The generated clone-urls for a repo is a combination of 'clone-prefix', a
slash and the repo url. This doesn't work well with e.g. ssh-style urls
like 'git@example.org:repo.git', since the inserted slash will make the
repo relative to the filesystem root.
* If 'remove-suffix' is enabled, the generated clone-urls will not work for
cloning (except for http-urls to cgit itself) since they miss the '.git'
suffix.
The new 'clone-url' setting is designed to avoid the mentioned issues:
* Each repo adopts the default 'clone-url' when the repo is defined. This
allows different groups of repos to adopt different values.
* The clone-urls for a repo is generated by expanding environment variables
in a string template without inserting arbitrary characters, hence any
kind of clone-url can be generated.
* Macro expansion also eases the 'remove-suffix' pain since it's now
possible to define e.g. 'clone-url=git://foo.org/$CGIT_REPO_URL.git' for
a set of repos. A furter improvement would be to define e.g.
$CGIT_REPO_SUFFIX to '.git' for all repos which had their url prettified,
or to store the original $CGIT_REPO_URL in e.g. $CGIT_REPO_REAL_URL before
suffix removal.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When cgit learned to setup environment variables for certain repo
settings before invoking a filter process, the setup occurred inside
cgit_open_filter().
This patch moves the setup out of cgit_open_filter() and into
prepare_repo_cmd() to prepare for additional uses of these variables.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
In d0cb841 (Avoid trailing slash in virtual-root), virtual-root was set
from script-name using trim_end(). However, if script-name was the
empty string (""), which happens when cgit is used to serve the root
path on a domain (/), trim_end() returns NULL and cgit acts like
virtual-root is not available. Now, set virtual-root to "" in this
case, which fixes this bug.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Currently the number of extra arguments is linked hard to the type of
the filter. This is also logical since it would be confusing to have
a different number of arguments for the same type of filter depending
on the context under which the filter is run (unless ofcourse one the
parameters would make the context clear, which is currently not the
case).
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When setting virtual-root from cgitrc, care is taken to avoid trailing
slashes. But when no virtual-root setting is specified, SCRIPT_FILE
from the web server is used without similar checks. This patch fixes the
inconsistency, which could lead to double-slashes in generated links.
Noticed-by: Wouter Van Hemel <wouter@duodecim.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
We were returning 200 before. Even 404 is questionable in all cases, but
200 was totally wrong. Also match the case of all of the "Not found"
status messsages.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
If advertising other URLs to your users, you may not want to make this
available through cgit (e.g. if you have the smart HTTP transport set up
elsewhere). Allow disabling the three magic commands that simulate the
git server, but default it to enabled.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Allow for per repo logo and logo-link; Use global logo and logo-link per
default.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Paths that start with a period ('.') are considered hidden in the Unix world.
scan_path() should arguably not recurse into these directories by default.
This patch makes it so, and introduces the "scan-hidden-path" config variable
for overriding the new default and revert to the old behaviour (scanning _all_
directories, including hidden .directories).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
Teach CGit to print an ASCII art commit graph to the left of the commit
message, similar to 'git log --graph'. The graph adds extra lines (table
rows) to the log when needed to add/remove/shuffle edges in the graph.
When 'showmsg' is enabled, the graph is automatically padded to account
for the extra lines added by the commit message/notes.
This feature is controlled by a new config variable: "enable-commit-graph"
(disabled by default), and individual repos can control it by setting
"repo.enable-commit-graph".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option is used to specify a filename which needs to be present in
the repositories found during `scan-path` processing. By setting this
option to 'git-daemon-export-ok', only repositories explicitly marked
for git daemon export will be included in the cgit configuration.
Signed-off-by: Felix Hanley <felix@seconddrawer.com.au>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
There were many places where the arguments to a printf-like function did
not match the format string. Mostly, these were a missing 'l' flag, but
there were three exceptions:
- In ui-stats.c, a size_t argument must be printed. C99 has the "%zu"
flag for this purpose, but not all compilers support this. Therefore,
we mimic what git does - use a NO_C99_FORMAT Makefile variable.
- In ui-stats.c, cgit_print_error() was called with a pointer instead of
a character.
- In ui-log.c, the "columns" argument was never used.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
When this option is enabled (which it is by default), cgit will lookup
the 'gitweb.owner' setting in each git config file found when processing
the 'scan-path' option.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When this option is enabled, the '.git' suffix of repository directories
found while processing the 'scan-path' option will be removed.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option specifies the location of a projectlist file as used by
gitweb - when 'scan-tree' is later specified, only the projects listed in
the projectlist file will be added.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The new ctx.qry.ignorews variable is passed via cgit_diff_files() and
cgit_diff_tree() to Git's diff machinery. This is equivalent to passing
--ignore-all-space to 'git diff'.
Signed-off-by: Johan Herland <johan@herland.net>
The new ctx.qry.context variable is picked up by cgit_print_diff(), and
passed via cgit_diff_files() to Git's diff machinery.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
For many commands/pages (e.g. 'tree', 'diff', 'plain', etc.), the
ctx.qry.path argument is interpreted as a path within the "virtual" project
directory structure. However, for some other commands (notably 'refs', and
the clone-related commands) ctx.qry.path is used in a different context (as
a more or less "real" path within the '.git' directory).
This patch differentiates between these two usages of ctx.qry.path, by
introducing a new variable - ctx.qry.vpath - which is equal to ctx.qry.path
in the former case, and NULL in the latter.
This will become useful in future patches when we want various pages and the
links between them to preserve existing in-project paths.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This allows one to specify the items in the RSS feeds
Signed-off-by: Aaron Griffin <agriffin@datalogics.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This patch teaches cgit to expand environment variables in certain
cgitrc option values (cache_root, scan-path, include) plus when
finding the location of cgitrc itself.
One use case for this feature is virtual hosting - e.g. by setting
$CGIT_CONFIG='/etc/cgitrc/$HTTP_HOST' in httpd.conf, all virtual
hosts automatically gets their own cgitrc.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Sometimes it is not feasible to generate the HTML pretty-print for large
files, especially if a source-filter is involved or binary data is to be
displayed. The "max-blob-size" config var allows to disable HTML output
for blobs bigger than X KBytes. Plain downloads are not affected.
Signed-off-by: Georg Lukas <georg@op-co.de>
Makes it easier to rewrite :)
lighttpd-sandbox: rewrite "/cgit.cgi?url=%{enc:request.path}&%{request.query}";
Signed-off-by: Stefan Bühler <source@stbuehler.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
A new config option side-by-side-diffs added, defaulting to 0,
meaning unidiff. Also a query option (ss) is used toggle this.
In the commit page you can switch between the two diff formats by
clicking on the link on the "commit"-row, to the right of (patch).
In the diff page you can switch by using the link at the start
of the page.
All commit-links and diff-links will remember the choice.
Signed-off-by: Ragnar Ouchterlony <ragnar@lysator.liu.se>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The repo-specific 'snapshots' option is bitwise AND'ed with the global
'snapshots' option during parsing, and since the global cgitrc hasn't
been parsed when --scan-path is processed the global 'snapshots' will
always be 0 (i.e. no repo-specific 'snapshots' setting will have any
effect).
This patch fixes the issue by setting the global 'snapshots' mask to
0xFF (hence relying on later parsing of the generated cgitrc repolist
to do the right thing).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Since repo.desc might have been populated by reading the 'description'
file in GIT_DIR, it may contain newlines. And by printing the literal
value, we may then generate an invalid cgitrc include-file.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Note: print_repo() still ignores repo.max-stats and repo.snapshots,
which both requires additional work since these settings are represented
internally as an enum and a bitmap.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option must be enabled if repo-specific cgitrc files should be
allowed to override any of the 'filter' options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When recursively scanning a directory tree looking for git repositories,
cgit will now parse cgitrc files found within such repositories.
The repo-specific config files can include any repo-specific options
except 'repo.url' and 'repo.path'. Also, in such config files the 'repo.'
prefix can not be used, i.e. the valid options then becomes:
* name
* clone-url
* desc
* ower
* defbranch
* snapshots
* enable-log-filecount
* enable-log-linecount
* max-stats
* module-link
* section
* about-filter
* commit-filter
* source-filter
* readme
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The new function repo_config() is used to handle all 'simple' repo
options, for the following reasons:
* code readability
* parser performance
* upcoming support for repo-local cgitrc files during scanning
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The 'repo.' prefix should be reserved for repo-specific options, but
the option 'repo.group' must still be honored to stay backwards
compatible.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This makes the name of the cgitrc option more descriptive and at the
same time changes the default from "0" to "1" in an attempt to stay
backwards compatible - prior to the introduction of "source-filter"
and "linenumbers", cgit always generated linenumber links in the
tree view, but now this feature can be turned off (one might want to
do this if the source-filter performs line-wrapping etc).
While at it, the documentation is updated to match the surrounding
descriptions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When generating a hash for caching, ctx.qry.raw is used as key. And
since cgit_parse_url() zero-terminates it's argument (after the repo
path), ctx.qry.raw must xstrdup(ctx.qry.url).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The querystring_cb() function will be invoked with a NULL value when
the querystring contains a name not followed by a '='. Such a value
used to cause a segfault, which this patch fixes.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
